Setting - Acer H6531BD User Manual

Setting

Use this function to select your desired startup screen. If you
change the setting, it will take effect when you exit the OSD
menu.
•
Startup Screen
•
•
Source Selection
•
Selects a preferred closed captioning mode from CC1, CC2,
CC3, CC4 (CC1 displays captions in the primary language in
Closed Caption your area). Select "Off" to turn off the captioning feature.
This function is only available when a composite video or S-
Video input signal is selected and its system format is NTSC.
Selecting "On" enables the function. The projector can
output a VGA signal when it is in standby mode and the VGA
IN (or VGA IN 1) and VGA OUT sockets are correctly
VGA OUT
connected to the devices.
(Standby)
Selecting "On" enables the function. The MHL port(s) and the
DC 5V out port/USB A port (if available) on the projector can
output 5V power when the projector is turned on.
USB 5V
(Standby)
Selecting "On" allows synchronized power ON/OFF operation
between the projector and a CEC-compatible device
connected to the HDMI/MHL port of the projector.
HDMI CEC
Acer: The default startup screen of your Acer projector.
User: Use the picture you transfer to the projector. See
"Acer Splash Downloader" for how to transfer the
picture.
Manual: When switching input signals, you need to press
"SOURCE" on the control panel or remote control, or
the direct source key on the remote control.
Auto: The projector will detect your source
automatically.
Enabling this function increases the standby power
consumption.
Only MHL port(s) will provide power output when
MHL port(s) and USB A port are both plugged.
This function is only available for the HDMI/MHL port.
25