Lenovo ThinkPad R14 User Manual page 53

8. Install a new M.2 solid-state drive by doing the following:
Note: Before installing a new M.2 solid-state drive, ensure that you install the rubber in place first.
a. Align the contact edge of the new M.2 solid-state drive with the key in the slot and carefully insert the
drive into the slot at an angle of about 20 degrees 1 . Then, pivot the M.2 solid-state drive downward
2
.
b. Install the screw to secure the M.2 solid-state drive 3 .
. 47
Chapter 6 CRU replacement