Connections (Notifications) - LG 40LF635T Easy Setup Manual

y Use the screws and wall mounts that meet the
y
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
NOTE
y Use the screws that are listed on the VESA
y
standard screw specifications.
y The wall mount kit includes an installation
y
manual and necessary parts.
y The wall mount bracket is optional. You can
y
obtain additional accessories from your local
dealer.
y The length of screws may differ depending upon
y
the wall mount. Make sure to use the proper
length.
y For more information, refer to the manual
y
supplied with the wall mount.
y When using the wall mounting bracket, apply
y
the adhesive protective label to cover the
unused stand opening(s). This will prevent the
accumulation of dust and dirt. (Use only when
provided with your particular model.)
Provided Item
Adhesive Protective Label
y When attaching a wall mounting bracket to the
y
TV, insert the wall mount inner spacers into the
TV wall mount holes to adjust the vertical angle
of the TV. (Only when the item of the following
form is provided)
Provided Item
Wall Mount Spacer

Connections (Notifications)

You can connect various external devices to the TV.
Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices. For
more information on external device's connection,
refer to the manual provided with each device.
10
NOTE
y If you record a TV program on a DVD recorder or
y
VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR.
For more information of recording, refer to the
manual provided with the connected device.
y The external device connections may differ from
y
the model.
y Connect external devices to the TV regardless of
y
the order of the TV port.
y If you connect a gaming device to the TV, use
y
the cable supplied with the gaming device.
y Refer to the external equipment's manual for
y
operating instructions.
y In PC mode, there may be noise associated
y
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change the PC
output to another resolution, change the refresh
rate to another rate or adjust the brightness and
contrast on the PICTURE menu until the picture
is clear.
y Depending upon the graphics card, some
y
resolution settings may not allow the image to
be positioned on the screen properly.
Connecting to an Antenna or Cable
Connect an antenna, cable, or cable box to watch TV.
The RF cable may not be supplied, depending upon
the model.
CAUTION
y Make sure not to bend the copper wire of the RF
y
cable.
Copper wire
y Complete all connections between devices,
y
and then connect the power cord to the power
outlet to prevent damage to your TV.
NOTE
y To improve the picture quality in a poor signal
y
area, please purchase a signal amplifier and
install properly.
y Use a signal splitter to use 2 TVs or more.
y
y If the antenna is not installed properly, contact
y
your dealer for assistance.
y DTV Audio Supported Codec: MPEG, Dolby
y
digital, AAC, HE-AAC