Table of Contents
Advertisement
Customizing Settings
Menu Settings
1
Press MENU button on the bottom of the Monitor set
to display the Menu OSD.
2
Set the options by pressing the ◄ or ► or ▼
buttons.
3
Select the "Next Menu" button to enter the more
option settings.
4
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow (
) button.
Each option is explained below.
Menu
Analog Digital
Volume
●
Brightness
●
Response Time
(only use for
●
22MB35PU-I*/
24MB35PU)
Wide/Original
●
Reset
●
Menu > Next Menu
Picture
Contrast
Sharpness
Color
Gamma
Color Temp
Six Color(only use for
22MB35PU-I*/24MB35PU)
Color Reset(only use for
22MB35PU-I*/24MB35PU)
Display Horizontal
Vertical
Clock
Phase
Others
Language
Power Indicator
Off Time Setting
Analog: D-SUB(Analog signal) input.
y
Digital: DVI-D(Digital signal) input.
y
●
To adjust the volume
●
To adjust the brightness of the screen
You can set a response time for displayed pictures based on the speed of the
●
screen. For a normal environment, it is recommended that you use 'Off'. For a
fast-moving picture, it is recommended that you use 'High'.
Wide
Switch to full screen mode according to input image signal.
●
Original
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor set ratio (16:9).
●
Restore all factory default settings. Press the
Analog Digital
●
●
To adjust the contrast of the screen
●
●
To adjust the clearness of the screen
●
●
To customize the color of the screen
●
To adjust the position of the screen
●
To improve the clarity and stability of the screen
●
●
To customize the screen status for a user's operating
environment
●
●
CUSTOMIZING SETTINGS
Description
◄
►
,
buttons to reset immediately.
Description
15
Advertisement
Table of Contents
