Advertisement

Quick Links

Safety Precautions
Please read these safety precautions carefully before using the product.
If you ignore the warning message, you may be seriously injured or there is a possibility of
Warning
accident or death.
Caution
If you ignore the caution message, you may be slightly injured or the product may be damaged
Precautions in installing the Product
Warning
Keep away from heat sources like electrical heaters.
- Electrical shock, fire, malfunction or deformation may occur.
Keep the packing anti-moisture material or vinyl packing out of the reach of children.
- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the
nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
Do not put heavy objects on the product or sit upon it.
- If the product collapses or is dropped, you may be injured. Children must pay particular attention.
Do not leave the power or signal cable unattended on the pathway.
- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.
Install the product in a neat and dry place.
- Dust or moisture can cause electrical shock, fire or product damage.
If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the
service center.
- If you continue to use without taking proper measures, electrical shock or fire can occur.
If you dropped the product or the case is broken, turn off the product and unplug the power cord.
- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service
center.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable
objects such as paper and matches. Children must pay particular attention.
- Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and
contact the service center.
Caution
Make sure the product ventilation hole is not blocked. Install the product in a suitably wide place (more
than 10cm from the wall)
- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
Do not block the ventilation hole of the product by a tablecloth or curtain.
- The product can be deformed or fire can break out due to overheating inside the product.
Install the product on a flat and stable place that has no risk of dropping the product.
- If the product is dropped, you may be injured or the product may be broken.
Install the product where no EMI occurs.
Keep the product away from direct sunlight.
- The product can be damaged.
A1

Advertisement

Table of Contents
loading

Summary of Contents for LG M1917A-BM.AWH

  • Page 1 Safety Precautions Please read these safety precautions carefully before using the product. If you ignore the warning message, you may be seriously injured or there is a possibility of Warning accident or death. Caution If you ignore the caution message, you may be slightly injured or the product may be damaged Precautions in installing the Product Warning Keep away from heat sources like electrical heaters.
  • Page 2: Precautions In Moving The Product

    Electrical Power Related Precautions Warning Make sure to connect the power cable to the grounded current. - You may be electrocuted or injured. Use the rated voltage only. - The product can be damaged, or you may be electrocuted. During a thunder or lightning storm, unplug the power cable or signal cable. - You may be electrocuted or a fire can break out.
  • Page 3: Safety Precautions

    Safety Precautions Caution Do not shock the product when moving it. - You may be electrocuted or the product can be damaged. Do not dispose the product-packing box. Use it when you move. Make the panel face forward and hold it with both hands to move. - If you drop the product, the damaged product can cause electric shock or fire.
  • Page 4: Inserting Batteries Into Remote Control

    Accessories Please check the accessories in the product package. * The product and the accessories can be different from the figures shown here. D-Sub Signal Cable Remote Control/Batteries CD-ROM/ Cards Stand base Power Cable Audio Cable (PC) Inserting batteries into remote control. 1.
  • Page 5: Before Connecting To The Pc

    Before Connecting to the PC Before setting up the product, ensure that the power to the product, the computer system, and other attached devices is turned off. Connecting the stand base Place the product with its front facing downward on a soft cloth. Align the hooks on the stand base with the matching slots in the base ofthe product.
  • Page 6: Positioning Your Display

    Before setting up the product, ensure that the power to the product, the computer system, and other attached devices is turned off. Positioning your display Adjust the position of the panel in various ways for maximum comfort. Tilt Range -3˚~25˚ Swivel :345˚...
  • Page 7: Name And Function Of The Parts

    Name and Function of the Parts Name of the Remote Control Buttons MUTE POWER MUTE Button Power On/Off Button MTS(Sound Mode Select) Button INPUT • Input Select Button Press repeatedly to select Mono, Stereo, • TV Button SAP sound tone. (See next page) But Stereo, SAP mode are available only EXIT...
  • Page 8 MUTE POWER INPUT • Input Select Button EXIT MENU Each time you press the Input button it will change to Video RGB-DTV RGB-PC. If nothing is inputted for several seconds the screen will automatically move to the selected menu. ENTER Input Video RGB-DTV...
  • Page 9 Name and Function of the Parts Rear View ANTENNA RGB(PC/DTV) Audio Power Connector : Connect the power cord. AV Input Terminal D-Sub Analog Signal Connector TV Tuner Jack : Connect the antenna. PC Sound Jack : Connect to the jack in the PC sound card. Headphone/Earphone Connection Terminal...
  • Page 10: Av Input Terminal

    AV Input Terminal Video Input Terminal Audio Input Terminal S-Video Input Terminal Connecting the sound card output terminal • Make sure to check the sound card connection terminal in the PC before connecting to the product. If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumper or the PC application.
  • Page 11: Connecting To External Devices

    Connecting to External Devices When Connecting to your PC First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable. When connecting with the D-Sub signal input cable. When connecting with the D-Sub signal input cable. Rear side of the product.
  • Page 12: Power Button

    Connect the power cord. Rear side of the product. * When connecting to a wall outlet. Turn on power by pressing the power button on the product. Power button Turn on the PC. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT Or, press the INPUT button at the front side of the product.
  • Page 13: When Watching Vcr/Dvd

    Connecting to External Devices When watching VCR/DVD Connect the video/audio cable as shown in the below figure and then connect the power cord. (See page A12) When connecting with an S-Video cable. When connecting with an RCA Connect to the S-Video input terminal to cable.
  • Page 14 Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT Or, press the INPUT button at the front side of the product. INPUT INPUT Input When connecting with a RCA cable. EXIT MENU •...
  • Page 15 Connecting to External Devices When watching DVD/SET-TOP BOX with a D-Sub cable Connect the RGB output of the digital set-top box/DVD to the RGB(PC/DTV) jack on the set. Connect the audio outputs of the set-top box/DVD to the Audio jack on the set. And then connect the power cord.
  • Page 16: When Watching Tv

    When watching TV See if the antenna cable is connected at the rear side of the product and then, connect the power cord. Rear Side of the Product ANTENNA Antenna Cable (Not included.) Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT Or, press the INPUTbutton at the front side of the product.
  • Page 17 To arrange cables in order Connect the signal cable, power cord and the audio cable to use in order to arrange in the cable holder as shown in the following figure. Cable Holder...
  • Page 18: Selecting And Adjusting The Screen

    Selecting and Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit INPUT • This Indicator lights up blue when the display operates normally Power Indicator (On Mode). If the display is in Sleep (Energy Saving) Mode, this indicator color changes to amber.
  • Page 19 Selecting and Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit OK Button • Select the icon to adjust on the OSD screen. [For PC Analog signal] RGB-PC Information 1280 X 1024 @60 Hz Input INPUT Button Television CVBS, S-Video Video...
  • Page 20: Osd (On-Screen Display) Menu

    OSD (On Screen Display) Menu Icon Function Description Set/Select the channel when using the TV CHANNEL Adjusting the picture function. PICTURE Adjusting the sound function. SOUND Adjusting the time function. TIMER Selecting the setup function. SPECIAL Adjusting the screen function. (RGB-PC, RGB-DTV only) SCREEN Note OSD(On Screen Display)
  • Page 21: Osd (On Screen Display) Screen Tracking Order

    Selecting and Adjusting the Screen OSD (On Screen Display) Screen Tracking Order MENU MENU ENTER ENTER ENTER ENTER Pop up the Move where Select a menu icon Adjust the status Save Exit from the you want to menu screen adjustment menu screen.
  • Page 22: Set/Select The Channel When Using The Tv

    Set/Select the channel when using the TV CHANNEL EZ Scan To start Manual program Favorite channel MENU EZ Scan Press button to start automatic programming. All available TV channels are searched and stored automatically. To stop auto CH progess, press the MENU or ENTER button. •...
  • Page 23 Selecting and Adjusting the Screen Adjusting the picture function (TV/Video) EZ Video The EZ Video function automatically adjusts the PICTURE screen image quality. (It is not adjust to the RGB-PC.) EZ Video Clear Optimum • Clear Contrast Soft Select this option to display with a sharp image. Brightness User •...
  • Page 24 Adjusting the picture function (RGB-DTV, RGB-PC) Selecting a factory setting color set. PICTURE • Cool EZ Video Slightly purplish white. Cool • Normal Contrast Slightly bluish white. Normal Brightness • Warm Warm Slightly reddish white. User • User Select this option to use the user-defined settings. Red / Green / Blue MENU Set your own color levels.
  • Page 25: Adjusting The Sound Function

    Selecting and Adjusting the Screen Adjusting the sound function SOUND EZ Audio Flat Music Balance Movie Sports User MENU EZ Audio The best sound tone quality will be selected automatically depending on the video type that you're currently watching. • Flat : The most commanding and natural audio. •...
  • Page 26: Adjusting The Time Function

    Adjusting the time function Auto Clock Setup Clock TIMER This function is used to set up of current time. Clock You must set the time correctly before using On/Off timer function. Off timer 1) Press the menu button and then use button to select the TIMER menu.
  • Page 27: Selecting The Setup Function

    Selecting and Adjusting the Screen Selecting the setup function SPECIAL Language Input Key lock Power indicator Caption /Text Captions Parental MENU Language To choose the language in which the control names are displayed. If you press the button once, the following Input Signal Window will appear. Select the Input signal type you want using the button.
  • Page 28 Selecting the setup function (To adjust the CAPTION & VCHIP function - US Only) Captions Use the buttons to select captions. (TV input only) [Remote Control] Press the CC button repeatedly to display the caption option as shown below. Press the ENTER button to select the caption option.
  • Page 29: Setting A Password

    Selecting and Adjusting the Screen Selecting the setup function (To adjust the CAPTION & VCHIP function - US Only) V-CHIP rating and categories - Rating guidelines are provided by broadcast station. Most television programs and television movies can be blocked by TV rating and/or individual categories. Movies that have been shown at the theaters or direct-to-video movies use the Movies Rating System(MPAA) only.
  • Page 30: Age Block

    Selecting the setup function (To adjust the CAPTION & VCHIP function - US Only) For movies previously shown in theaters. MPAA Parental Lock G & Above MOVIE Ratings : Set password PG & Above - G&Above : General audience MPAA PG-13 &...
  • Page 31 Selecting and Adjusting the Screen Selecting the setup function (To adjust the CAPTION & VCHIP function - US Only) Parental Aux block Lock Enables you to select a source to block from the Set password external source devices you have hooked up. MPAA Age block Content block...
  • Page 32: Using Closed Captions

    Closed Captions - Not all TV broadcasts include closed caption signals. Closed captioning is a process which converts the audio portion of a television program into written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs.
  • Page 33: Adjusting The Screen Function (Rgb-Pc, Rgb-Dtv Only)

    Selecting and Adjusting the Screen Adjusting the screen function (RGB-PC, RGB-DTV only) SCREEN To set Auto configure Manual configure Reset MENU Auto This button is for the automatic adjustment of the screen Position, Clock and Phase. configure This button is for the manual adjustment of the screen Position, Clock and Phase. Manual •...
  • Page 34: Troubleshooting

    Troubleshooting No image is displayed G Is the product power cord • See if the power cord is properly connected to the outlet. connected? G Does the power indicator is turned • See if the power switch is turned on. G Power is on, power indicator is blue •...
  • Page 35: The Screen Image Looks Abnormal

    Troubleshooting The screen image looks abnormal. G Is the screen position wrong? If adjustment is not satisfactory, use the Position menu in OSD . • See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel –...
  • Page 36: The Audio Function Does Not Work

    The audio function does not work. G No sound? • See if the audio cable is connected properly. • Adjust the volume. • See if the sound is set properly. G Sound is too low. • Adjust the volume. The TV function does not work. G The TV signal is not being received.
  • Page 37: Specifications

    Specifications The product specifications can change without prior notice for product improvement. [17 inch] LCD Panel Screen Type 17 inches (43.27 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 43.27 cm Pixel Pitch 0.264 mm Video Signal Max.
  • Page 38 The product specifications can change without prior notice for product improvement. [19 inch] LCD Panel Screen Type 19 inches (48.19 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 48.19 cm Pixel Pitch 0.294 mm Video Signal Max.
  • Page 39: Power Indicator

    Specifications PC Mode – Preset Mode [17 inch] [19 inch] Horizontal Vertical Horizontal Vertical Preset mode Frequency Frequency Frequency Frequency Preset mode (kHz) (Hz) (kHz) (Hz) 31.469 640 x 350 VESA 1024 x 768 48.363 31.468 720 x 400 VESA 1024 x 768 60.123 31.469...
  • Page 40: Vesa Wall Mounting

    VESA wall mounting This product meets VESA-compliant mounting interface pad specifications. Separate the Hinge Cover using a screwdriver as shown in the picture. Hinge Cover Please the product on a piece of cloth or other soft surface with the front side facing downward. Separate the stand base using a screwdriver as shown in the picture.

This manual is also suitable for:

M1717a-bm.awh

Table of Contents