Fig. 63: Fitting Wall Insert; Table 48: Tightening Torque (72011) - ABB HT602948 Operation Manual

Operation Manual / A170-M.. - A175-M..
9 Disassembly and assembly / 9.11 Installing the compressor casing
Fitting wall insert
Fig. 63: Fitting wall insert
Product
A170-M
A175-M
Table 48: Tightening torque (72011)
1. Remove lifting device (90190 / 90195) and fixing segment (90192).
2. Slide wall insert (77000) into compressor casing up to stop and remove guide stud
(90319).
3. Secure wall insert with screws (72011) and washers (72008).
For assembly of the alternative air inlet, see section Installing air inlets.
© Copyright 2020 ABB. All rights reserved.
Size
M20
M24
HZTL4033_EN
Tightening torque [Nm]
580
1000
Rev.G December 2020