Sharp GX27 Manual page 108

2.
Press or to highlight "Backlight", then press
to select.
3.
Press or
to select.
4.
Press or
"Normal Settings", then press
To Set the Blinking Operation
This setting enables the backlight to be controlled by
the application. If set to "Off", the backlight cannot be
turned on from the application.
1.
Perform steps 1 and 2 in "Backlight" on page 107.
2.
Press or to highlight "Blink", then press
to select.
3.
Press or
press to select.
108 Fun & Games
to highlight "On/Off", then press
to highlight "On", "Off" or
to select.
to highlight "On" or "Off", then
Vibration
When the vibrator is set in the application, you can
choose whether the operation is enabled or disabled.
When a SMAF file is specified in the application, you
can operate the vibrator set in the SMAF file.
Note
• SMAF (Synthetic music Mobile Application Format)
is a music data format for mobile phones.
1.
Perform steps 1 to 4 in "Operation Priority" on
page 106.
2.
Press or to highlight "Vibration", then press
to select.
3.
Press or to highlight "Enable", "Disable" or
"Link to Sound", then press
When you set "Link to Sound", the application is
synchronised with the vibrator.
to select.