Advertisement
I N S T A L L A T I O N
The first step of installing a speaker system is thorough planning. Choose a suitable location
for your speaker components carefully. Follow these suggestions to ensure proper imaging
and maximum performance:
1. Choose a location that offers the least amount of obstruction between the components and
your ears.
2. Try to mount the speakers on the same plane. That is, they should be at the same height
and directly across from each other. Do not mount one speaker higher, lower, further forward
or further back from the opposite speaker.
3. Always check behind the chosen mounting locations to ensure that there is proper clearance
for the back of the speakers and avoid obstructions such as window tracks, wire harnesses,
gas tank etc.
4. Maximum performance is achieved when the speaker is securely mounted to a door panel
or rear speaker deck. There should be no gaps between the speaker basket and the mounting
surface.
W I R I N G D I A G R A M A N D I N T E R C O N N E C T I O N
SPEAKER CONNECTION:
• Connect the Plus-Terminal of the loudspeaker (marked with an cross) with the
Plus-Terminal of the amplifier's speaker outputs (e.g. + L).
• Connect the Minus-Terminal of the loudspeaker with the Minus-Terminal of the
amplifier's speaker outputs (e.g. – L).
• Repeat the procedure for all other regarding Speakers and Channels.
CAUTION
Please ensure the correct polarity (+ or -) for all connections.
Never connect loudspeakers directly with the vehicle's chassis or power supply.
SPEAKER L
SPEAKER OUTPUTS
OF THE AMPLIFIER
+
L
–
+
R
PLUS
MINUS
–
SPEAKER R
MINUS
PLUS
Advertisement
