Key Dimensions And Specifications; Stacking Kit Installation - LG DLG2051W User's Manual & Installation Instructions

STACkING kIT INSTALLATION

Place the dryer on top of the washer by
3
fitting the dryer feet into the side brackets as
illustrated. Avoid finger injuries; do not allow
fingers to be pinched between the washer
and dryer. Slowly slide the dryer toward the
back of the washer until the side bracket
stoppers catch the dryer feet.

kEY DIMENSIONS AND SPECIFICATIONS

The appearance and specifications listed in this guide may vary due to constant product improvements.
Description
Electrical Requirements*
Gas Requirements*
Dimensions
Net Weight
Drying Capacity
DLE2150W/DLE2150R/DLE2150S/DLE2150L
DLG2151W/DLG2151R/DLG2151S/DLG2151L
Drying Capacity
DLE2050W/DLE2050R/DLE2050S/DLE2050L
DLG2051W/DLG2051R/DLG2051S/DLG2051L
DLE2020W/DLE2020R/DLE2020S/DLE2020L
DLG2021CW/DLG2021CR/DLG2021CS/
DLG2021CL
*Refer to the rating plate on your dryer.
(cont.)
Dryer
Washer
4
Dryer
Please refer to the rating label regarding detailed information.
NG: 10–13 in. WC/LP: 10–13 in. WC (Gas Models only)
27"(W) X 30"(D) X 38
68.6 cm (W) X 76.1 cm (D) X 98.3 cm (H), 127 cm (D with door open)
126 lb. (57.2 kg)
IEC 7.3 cu. ft. (22.5 lbs./10.2 kg)
IEC 7.1 cu. ft. (22.5 lbs./10.2 kg)
Insert the front rail between the bottom of
the dryer and the top of the washer. Push the
front rail toward the back of the washer until it
comes in contact with the side rail stoppers.
Install the two remaining screws to secure the
front rail to the side rails.
11 / "(H), 50 (D with door open)
16
41