LG WM2450HRA Owner's Manual page 33

BEFORE CALLING FOR SERVICE
Problem
• Load is too small.
The display shows:
• Load is out of balance.
• The washer has an imbalance
The display shows:
• Control error.
The display shows:
• Water level is too high due to
The display shows: • The water level sensor is not
The display shows:
• Thermal overload protection
The display shows: • A power failure has occurred.
Staining • Add laundry products to the
• Washer not unloaded
• Does not properly sort the
Wrinkling
• Washer not unloaded
• Washer overloaded.
• Hot and cold water inlet
(cont.)
Possible Causes
detection and correction
system. If individual heavy
articles are loaded (bath
mat, bath robe, etc.) and the
imbalance is too great, the
washer will make several
attempts to restart the spin
cycle. If an imbalance is still
detected, the washer will stop
and the error code will be
displayed.
a faulty water valve.
working correctly.
circuit in the motor has been
tripped.
washer drum.
promptly.
clothes.
promptly.
hoses are reversed.
T RO U B L E S H O OT I N G
Solutions
• Add 1 or 2 similar items to help balance the load.
• Rearrange items to help balance the load.
• Unplug the washer and call for service.
• Close the water taps, unplug the washer, and call for
service.
• Close the water taps, unplug the washer, and call for
service.
• Allow the washer to stand for 30 minutes to allow the
motor to cool; then restart the cycle. If the LE error
code still appears, unplug the washer and call for
service.
• Restart the cycle.
• Load the laundry products into the dispenser.
• Always remove items from the washer as soon as the
cycle is completed.
• Always wash dark colors separately from light colors
and whites to prevent discoloration. If possible, do not
wash heavily soiled items with lightly soiled ones.
• Always remove items from the washer as soon as the
cycle is completed.
• The washer can be fully loaded, but the drum should
not be tightly packed with items. The door of the
washer should close easily.
• Hot water rinse can set wrinkles in garments. Check
the inlet hose connections.
33