Advertisement
2.
Insert 2 AAA alkaline batteries into the camera.
3.
Turn on the camera.
Press the POWER button to turn it on (press it again to turn off).
5.2 Inserting a memory card (not included)
This camera has built-in internal memory. This memory can be extended with a SD memory
card (not included).
Follow the instructions given below to insert the optional SD memory card into the camera.
1.
Turn off the camera first.
2.
Insert the SD card into the camera.
Note: There is only one right direction to insert the SD memory card into the slot. Do not force
the card into the slot, or else it may damage both the camera and the SD memory card.
Note: The SD memory card must be formatted before taking photographs. See the following
sections for more information.
5.3 Formatting the memory or SD card
1.
Press Menu button
2.
Select Setup setting by right key.
3.
Press OK to confirm and select by up or down key.
4.
Press OK to format the card or memory.
5.4 Setting the resolution
The camera can be set to different resolutions.
1.
Press MENU to set proper resolution.
Resolution: VGA（640 x 480），1.3M（1280x960） 3.1M (2048 x 1536),
5M (2560 x 1920), 8M (3264x2448), 12M (4032x3024)
2.
Six different resolutions will be displayed. Select the desired resolution by using the
or
▼
buttons and then press the OK button to confirm the selection.
5.5 Taking photographs
1.
Turn on the camera by pressing the ON/OFF button.
2.
Press MODE to set the camera to photo mode (
).
3.
Depending on the distance to the object being photographed, use Macro switch to
adjust the distance. Select the flower symbol (
) if you wish to take a close-up
photograph (11cm –18cm).
If you wish to take photograph of surroundings or people (0.5m - infinity), set the Macro
switch to Normal mode (
).
4.
If you are not sure if there is enough lighting, turn the automatic flash (
the flash button. (If the battery power is too low, the flash won't be activated).
5.
Use the LCD screen to aim the object you wish to photograph.
6.
Press Shutter button and hold the camera steadily for 2 to 3 sec, until the LCD display
turn on again.
Caution: 1) Taking picture for fast-moving object is not recommended.
2) Image may be distorted when taking picture in a moving vehicle.
5.6 Zoom in and out
The camera can zoom in up to 8 times.
1.
▲
▼
Zoom in by pressing the
or
button, a number will appear on the display. 8.0 is the
maximum zoom.
2.
You can zoom in by pressing the UP or DOWN button.
5.7 Taking photographs using self-timer function
You can use the self-timer function when you wish to take a photograph for yourself or when
you wish to photograph for an object where the camera must be as still as possible, for
example on the stand.
1.
Set the camera to photo mode.
2.
Press the MENU button. The quick menu will appear.
3.
▲
▼
▼
Press
to self-timer mode, press OK and
or
to set the delay time: 2seconds /
10 seconds / 10+2seconds or off.
4.
Press the OK button to confirm. The self-timer function is now ready for use.
5.
Aim at the object you wish to photograph.
6.
Press the SHUTTER button to take a photograph.
7.
The self-timer indicator LED in the front will blink.
8.
The photograph will be taken after the timer reaches the delay time that you pre-set, and
the camera will beep once.
5.8 Recording video clips
1.
Press the MODE button to select the video clip mode.
2.
Press the SHUTTER button to start recording video, press the SHUTTER button again
to stop recording. The video clip will now be saved as an AVI file in the camera memory.
3.
Press MENU to set proper resolution, EV and WB, and press OK to confirm.
5.9 Playback photographs
1.
Press PLAYBACK button, press
▲
2.
Press
, it will go to 2x zoom, press
3.
Press OK and then, press
4.
Press MENU to select SLIDE SHOW, and then press OK to confirm. The pictures saved
in your camera or your SD card will be displayed in sequence automatically.
5.10 Playback video clips
1.
When video clips are displayed, press
2.
Press OK to pause the playback
3.
Press PLAYBACK key to exit.
5.11 Recording voice
1.
Press MODE button to select the voice recording mode,
2.
Press SHUTTER to start voice recording and press it again to stop.
▲
5.12 Delete photographs and video clips
You can choose to delete a single photograph / video clip, or delete all the photographs / video
clips in the memory.
5.12.1 Delete photograph
Follow the instructions given below to delete photograph.
1.
Press PLAYBACK to enter the playback mode.
2.
Press the MENU button and select Delete One/Delete All, press OK to confirm.
3.
If you select Protect picture, your current file or images can not be deleted.
4.
Press MENU to exit.
) on by pressing
NOTE: Select 'Deleting All' and Press OK to confirm, all the pictures will be deleted.
5.12.2 Shortcut to delete one picture
1.
Press PLAYBACK to enter Playback mode.
2.
Select the photo (video) you want to delete, press DELETE
3.
Press OK to confirm.
6. Installing the camera driver
The driver in the CD has to be installed, under following applications:
For windows ME, Windows 2000, Windows Vista and Windows XP: For using as a PC cam
only. (Download picture /video is driver free)
6.1 Uninstalling old drivers and devices
There is a chance for a conflict between the new driver and an existing driver in the computer.
In that case, it is better to remove those drivers before installing the new driver.
1.
Enter Windows 'Safe Mode' (press F8 when starting Windows and then select 'Safe
Mode' from the menu which will be displayed).
2.
Click on 'Start – Settings – Control Panel' and double-click on 'Add/Remove Programs'
icon.
3.
Find all the programs for similar, old devices and remove these by clicking on the
'Add/Remove' button. When in 'Safe Mode', it is possible for some programs to appear
twice. In that case, remove all the programs which appear twice.
4.
Restart the computer.
6.2 Installing the driver for Windows ME / Windows 2000 /
Windows XP / Windows Vista
Note: Make sure all other programs are closed during the installation process.
Note: During installation for Windows XP/Vista, you may receive a message saying that the
driver has not been signed. This does not cause a problem for the functionality of the
program. Please click "Yes" to continue.
Note: For example, 'D: \' is used to indicate the CD-ROM drive. This may be different for your
computer.
or
to select the video clip or photo.
▲
again to 3x zoom...... up to 8x.
▲
▼
,
,
or
to shift the image.
OK
and press DOWN key to stop
to play,
.
button.
1.
Insert the CD-ROM into your computer's CD-ROM drive. The installation program will
start automatically. If it does not start automatically, please do the following:
a) Select 'Run' from Windows Start menu.
b) Type [D:\SETUP.EXE] and click on 'OK' to start the Software Installer.
2.
The Software Installer will appear.
3.
Select the language you wish to use for the installation.
4.
Click on 'Install driver'to start the installation of the camera driver.
5.
Follow the on-screen instructions.
6.3 Connecting the camera
The camera can be connected to the computer in two different modes: Mass Storage Device,
or as a PC camera for video conferencing on the Internet.
6.3.1 Connecting as a mass storage device
1.
Turn the camera on by pressing the ON/OFF button.
2.
Press MENU button and press RIGHT key to select the Setup setting.
3.
▼
Press
button to set USB connection.
4.
▲
Press
or
▼
button to choose the Disk Drive mode.
5.
Press OK to confirm.
6.
Connect the camera to the computer.
7.
Windows will automatically detect the camera. You can use this camera as a removable
disk.
6.3.2 Connecting as a PC camera
When you connect the camera as a PC camera, you can use the camera as a web cam for
video conferencing on the Internet by using Windows NetMeeting or Windows Messenger.
(You must install the driver before connecting the Digital Camera to your computer. )
1.
Turn the camera on by pressing the ON/OFF button.
2.
Press MENU button and press RIGHT key to select the Setup setting.
3.
▼
Press
button to chook USB connection.
4.
▲
▼
Press
or
button to choose the PC camera mode.
5.
Press OK to confirm.
6.
Connect the camera to the computer.
7.
Windows will automatically detect the camera. You can use this camera as a web
camera.
7. Trouble shooting
Problem
Cause
Cannot turn on the camera
Low battery power.
Replace or install the battery
by pressing the "power"
Battery placed at wrong
correctly.
button.
polarities.
Photos can not be saved
The memory card or
Format the memory in SETUP
when taking pictures.
built-in memory hasn't
mode of the camera. Please refer
been formatted
to section 5.3.
properly.
Cannot find removable disk
1. Connection failure.
1. Make sure all cable
after connecting the camera
2. The mode of the
.
camera is not set to
to the computer
removable disk
properly
2. Set the camera to removable
Flash does not work.
Battery Power is too
Replace with new ALKALINE
low.
battery.
The batteries used up very
Use wrong type of
Replace with new ALKALINE
fast.
battery.
battery.
Set the flash light to
Set the Flash light to Auto mode
The photos are over
force mode
in bright
exposure
environment.
1. The camera is not
1. Hold the camera steadily until it
held steadily
The photos are blurry
2. The lens of camera
2. Clean the lens with soft dry
is dirty
3.
The camera is Set to
3. Set the macro mode according
wrong macro mode.
Solution
connections are secured and
restart the computer if
necessary.
disk mode, refer to section
6.3.1(system setting, USB
connection).
.
beeps when taking photo.
cloth.
to the distances of subject.
Advertisement
