External A/V Source Setup; Dvd Setup - LG RU-42PX10C Owner's Manual

External A/V Source Setup
External A/V Source Setup
How to connect
Connect the audio and video cables from the external
equipment's output jacks to the TV input jacks, as shown in
the figure.
When connecting the TV to external equipment, match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
How to use
1. Select the input source by using the TV/VIDEO button on
the remote control. (If connected to A/V INPUT 1, select
Video 1 input source).
2. Operate the corresponding external equipment. Refer to
external equipment operating guide.

DVD Setup

DVD Setup
How to connect
1. Connect the DVD video outputs (Y, P
(Y, P , P ) INPUT jacks on the TV and connect the DVD audio
B R
outputs to the AUDIO INPUT jacks on the TV, as shown in the fig-
ure.
2. If your DVD only has an S-Video output jack, connect this to the
S-VIDEO input on the TV and connect the DVD audio outputs to
the AUDIO INPUT jacks on the TV, as shown in the figure.
NOTE: If your DVD player does not have component video output,
use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the TV/VIDEO or MULTIMEDIA button on the remote control
to select Component 1 or Component 2. (If connected to S-
VIDEO, select the Video 1 or Video 2 external input source.)
3. Refer to the DVD player's manual for operating instructions.
• Component Input ports
To get better picture quality, connect a DVD player to the compo-
nent input ports as shown below.
Component ports
on the TV
Video output ports
on DVD player
, P ) to the COMPONENT
B R
Y P P
B R
Y Pb Pr
R-Y
Y B-Y
Cr
Y Cb
P
Y P
R
B
COMPONENT
INPUT 2
COMPONENT
INPUT 1
R L R L/MONO
VIDEO
VIDEO AUDIO AUDIO
AUDIO
R L
COMPONENT
INPUT 2
COMPONENT
INPUT 1
R L R
VIDEO AUDIO
(R) AUDIO (L)
B R
Installation
MONITOR
OUTPUT
A/V
INPUT 1 Antenna
AC INPUT
S-VIDEO
Camcorder
VIDEO
Video Game Set
MONITOR
OUTPUT
A/V
INPUT 1 Antenna
AC INPUT
S-VIDEO
L/MONO
AUDIO VIDEO
or
(R) AUDIO (L)
S-VIDEO
DVD
Owner's Manual 13