Table of Contents
Advertisement
4. HDMI™ connector
5. Audio connector
6. microSD card slot
4
T495 User Guide
Connect to a compatible digital audio device or video monitor, such as an HDTV.
The HDMI connector on your computer supports the HDMI 2.0 standard by
default. If you connect an external display to your computer through the HDMI
connector with an HDMI 1.4 cable, the external display might not work. In this
case, do one of the following:
• Use a qualified HDMI 2.0 cable instead of an HDMI 1.4 cable.
• Change the HDMI standard of the HDMI connector from 2.0 to 1.4. To change
the HDMI standard, enter the UEFI BIOS menu (see "Enter the UEFI BIOS
menu" on page 41), and then configure HDMI Mode Select in the Config
menu.
Connect headphones or a headset with a 3.5-mm (0.14-inch) and 4-pole plug to
listen to the sound from the computer.
Note: The conventional microphone is not supported.
Insert a microSD card for data access or storage.
Advertisement
Table of Contents
