Table of Contents
Advertisement
7
Top
Remove the battery cover by gently
sliding it away from the remote.
When needed, VIZIO recommends replacing
the batteries that came with this remote with
two, new Duracell 'AAA' alkaline batteries.
9
Turn on your TV and sound bar. The sound bar will automatically
begin searching for an active input.*
The LED indicators on the front of the sound bar will begin cycling
in pairs through inputs until an audio source is detected.**
Tip: Pressing the INPUT button will stop
the auto detect function.
You can press the INPUT button to switch between audio
sources. For example, if you connected your TV to AUX, set the
sound bar to AUX.
*Occurs only during fi rst-time set up.
**Auto detect function only occurs once when the sound bar is fi rst powered on. To enable this feature again, you must
do a Factory Reset (see the Using Button Combinations section for more information) or press and hold the INPUT
button for 3 seconds.
8
Top
Insert the included batteries and gently
slide the battery cover back into place.
Power
Input
English - 15
Advertisement
Table of Contents
