Tidying Cables; Mounting On A Wall - LG 26MA33A Owner's Manual

12
ASSEMBLING AND PREPARING
Using the Kensington security system
The Kensington security system connector is located
at the back of the TV. For more information of
installation and using, refer to the manual supplied
with the Kensington security system or visit http://www.
kensington.com .
Connect the Kensington security system cable between
the TV and a table.
NOTE
The Kensington security system is optional. You can
obtain additional accessories from most electronics
stores.

Tidying cables

Gather and bind the cables with the supplied cable tie.

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm
on each side and from the wall. Detailed installation
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and Setup
Guide.
If you intend to mount the TV to a wall, attach Wall
mounting interface (optional parts) to the back of the TV.
When you install the TV using the wall mounting interface
(optional parts), attach it carefully so it will not drop.
1
Please, Use the screw and wall mount interface
in accordance with VESA Standards.
2
If you use screw longer than standard, the TV
might be damaged internally.
3
If you use improper screw, the product might
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
4
VESA compatible only with respect to screw
mounting interface dimensions and mounting
screw specifications.
Cable Tie
10 cm
10 cm
10 cm
10 cm