Entertainment; Network Connection; Connecting To A Wired Network - LG 42LK550 Owner's Manual

48

ENTERTAINMENT

ENTERTAINMENT

Network Connection

Connecting to a wired network

Connect the TV to a local area network (LAN) via
the LAN port as shown in the following illustration
and set up the network settings.
If wired and wireless networks are both available,
wired is the preferred method.
After making a physical connection, a small
number of home networks may require the TV
network settings to be adjusted. For most home
networks, the TV will connect to automatically
without any adjustments.
For detail information, contact your internet
provider or router manual.
LAN LAN
LAN
Router
@
Cable modem
Internet
CAUTION
Do not connect a modular phone cable to the
y y
LAN port.
Since there are various connection methods,
y y
please follow the specifications of your
telecommunication carrier or internet service
provider.
After connecting the LAN port, use the
y y
Premium or LG Apps menu.
COMPONENT
IN1
WIRELESS
CONTROL
AV IN1
AUDIO IN AUDIO IN AUDIO IN OPTICAL DIGITAL PTICAL DIGIT TICAL DIGIT ANTENNA/ ANTENNA ANTENNA
RGB IN (PC)
(RGB/DVI) AUDIO OUT CABLE IN
WAN
ETHERNET
To set up the network settings: (Even if your TV
has already connected automatically, running
setup again will not harm anything)
1
Press Home to access the Home menu.
2
Press the Navigation buttons to scroll to
SETUP and press ENTER.
3
Press the Navigation buttons to scroll to
NETWORK and press ENTER.
4
Press the Navigation buttons to select
Network Setting and press ENTER.
5
If wired and wireless are simultaneously
connected, press the Navigation buttons to
select Wired and press ENTER.
6
If you have already set the Network Setting,
select Resetting. The new connection settings
will reset the current network settings.
7
Select IP Auto Setting or IP Manual Setting.
- If selecting IP Manual Setting, press the
AV IN 2
Navigation and Number buttons. IP addresses
AUDIO / VIDEO
COMPONENT IN 2 H/P
AUDIO / Y P B P R
will need to be input manually.
- IP Auto Setting: Select this if there is a DHCP
server (Router) on the local area network
(LAN) via wired connection, the TV will
automatically be allocated an IP address. If
you're using a broadband router or broadband
modem that has a DHCP (Dynamic Host
Configuration Protocol) server function. The
IP address will automatically be determined.
- IP Manual Setting: Select if there is no DHCP
server on the network or you want to set the
IP address manually.
8
When you are finished, press EXIT.