Operating The Air Conditioner Without The Remote Control; Restarting The Air Conditioner Automatically - LG SN09DLG-2 Owner's Manual

Operating the air conditioner
without the remote control
unit to operate the air conditioner when the
remote control is unavailable. However, the
fan speed is set to high.
1
Open the front cover.
- Lift up both sides of the cover slightly.
* The feature can be changed according to
type of model.
2
* The feature can be changed according to
type of model.
- For cooling and heating models, the oper-
ation mode changes, depending on the
room temperature.
Room temp. Set temp.
Below
24°C(76°F)
21°C(70°F)
Above
21°C(70°F)
And 23°C(74°F)
Below
24°C(76°F)
Above
22°C(72°F)
24°C(76°F)
- For cooling-only models, the temperature
is set to 22°C (72°F).
Restarting the air conditioner
automatically
When the air conditioner is turned on again
after a power failure, this function restores
the previous settings. This function is a fac-
tory default setting.
1
* The feature can be changed according to
2
ON/OFF
button
* The feature can be changed according to
Operation
mode
Heating
operation
Dehumidify-
ing operation
Cooling
operation
ADVANCED FUNCTIONS
Disabling auto restart
Open the front cover.
- Lift up both sides of the cover slightly.
type of model.
seconds.
- The unit will beep twice and the lamp will
blink 6 times.
type of model.
- To re-enable the function, press the On/
unit will beep twice and the blue lamp will
blink 4 times.
!
NOTE
for 3 – 5 seconds instead of 6 seconds,
the unit will switch to the test operation.
In the test operation, the unit blows out
strong air for cooling for 18 minutes and
then returns to the factory default set-
tings.
15
ON/OFF
button