Remote Control Vcr Specific Button - Philips 36RF82S399 Directions For Use Manual

Table of Contents

Advertisement

R
W
hen using the TV remote control with a
VCR, first make certain it is set to con-
trol your VCR (by the REMOTE CODE or
SEARCH method).
1
Slide the TV/VCR/ACC Switch to the
VCR position.
2
Point the top of the remote toward the
front of the VCR (remote sensor win-
dow) when pressing the buttons.
TV/VCR Button
Press while in the VCR mode (the VCR indica-
tor on the front of the unit will light) to view the
playback of a tape. Press again to place in the
TV position (the VCR indicator light will go
off) to view one program while recording anoth-
er program.
TV/VCRACC Swtich
When in the VCR position, the remote is in
the VCR Mode of operation and commands
can be sent to the VCR.
MENU Button
Press to display the VCR onscreen menu
controls. Also used to make selection within
the menu controls.
Stop Button
Press to stop the motion of a tape in play-
back, rewind, fast forward, and so on.
Rewind Button
Press to rewind tapes. For some VCR's, the
STOP button may have to be pressed first,
then REWIND. In playback mode, hold
down the button to view the picture moving
rapidly in reverse.
H
H
ELPFUL
Remember, the VCR buttons on the remote will
not operate your VCR if those features are not
found on your VCR remote control.
NOTE: All VCR functions (particularly
Search, Rewind, Fast Forward, etc.) will oper-
ate the same as with the original VCR remote
control provided with the VCR.
C
EMOTE
ONTROL
INT
VCR S
B
PECIFIC
2
1
53
UTTONS
Power Button
Press to turn the VCR ON and OFF.
Number Buttons
Press buttons for the direct selection of
VCR channels.
Cursor Up/Down/Left/Right
Press to navigate the vcr onscreen cus-
tomer controls.
Channel + and – Buttons
Press to scan up or down through the VCR
channel numbers.
(cc)Record • Button
Hold the REC(ord/Sap) and PLAY
down to begin a VCR recording.
Pause Button II
Press to temporarily stop the tape during a
playback or recording. Press again to
release Pause.
Fast Forward Button
Press to rapidly advance the tape. For some
VCRs, you may need to press the STOP
button first, then the FAST FORWARD
button. In playback mode, hold the button
down to view the picture moving rapidly in
the forward direction.
Play Button
Press to begin playback of a videotape.
buttons

Advertisement

Table of Contents
loading

Table of Contents