How To Set The Sleep Timer Control - Philips 32RF52S99 Directions For Use Manual

H ave you ever fallen asleep in front of the
TV, only to have it wake you up at two in
the morning with a test pattern sound
screeching in your ears? Well, your TV can
enable you to avoid that discomfort by auto-
matically turning itself off. With the Sleep
Timer feature, you can set a timer to automat-
ically switch the TV OFF after a period of
time you choose (15-minute increments up to
60 minutes, then 30-minute increments up to
90 minutes, then 60-minute increments up to
240 minutes).
1
Press the SLEEP button on the
remote control. The SLEEP timer
onscreen display will appear in the
upper part of the screen.
2
Within five seconds, press the
SLEEP button repeatedly to pick the
amount of time (15-minute increments
up to 60 minutes, then 30-minute
increments up to 90 minutes, then 60-
minute increments up to 240 minutes)
before the TV will turn itself off.
An onscreen countdown will appear during
the last minute before the TV shuts itself off.
H
ELPFUL
To see how many minutes remain before the
TV shuts itself off, press the STATUS/EXIT
button.
A Sleep Timer setting can be cancelled by
pressing any button during the last minute
of the operation.
During the last minute of a
SLEEP timer setting, an onscreen
countdown will be displayed.
H S
OW TO
H
INT
50 SEC
S T
ET THE LEEP IMER
SLEEP OFF
2
4
During the last 10 seconds of a
SLEEP timer setting, an onscreen
display will read GOOD BYE.
GOOD BYE
44
C
ONTROL
SLEEP 15
SLEEP 30
SLEEP 45
SLEEP 60
SLEEP 90
SLEEP 120
SLEEP 180
SLEEP 240