Sleep Timer Setting; Dimmer; Mute; Equalizer Effect - LG SH32SD-SZ Owner's Manual

Sleep Timer Setting

You can set the DVD/CD Receiver to turn off
automatically at a specified time.
1. Press SLEEP to set the desired sleep time.
The SL indicator and the sleep time appears in the
display window.
2. Each time you press SLEEP the setting
changes in the following order.
SL 180 →150 →120→90 →80 → 70 → 60→ 50 → 40 → 30
→ 20 →10 →OFF
Note:
You can check the remaining time before the DVD/CD
Receiver turns off.
Press SLEEP. The remaining time appears in the
display window.

Dimmer

This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER repeatedly.

Mute

Press MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone.

EQUALIZER Effect

You can choose 8 fixed sound impressions and adjust
the BASS, MIDDLE and TREBLE.
- You can select a desired sound mode by using EQ
button on the remote control.
When you want to change a sound mode press the
EQ button repeatedly within 3 seconds.
Each time you press the button the setting changes
in the display window as shown below.
nORMAL (NORMAL) → IndIA (INDIA) →
USr EQ (USER EQ) → POP (POP) → CLASS
(CLASSIC) → ROCk (ROCK) → dRAmA (DRAMA) →
JAzz (JAZZ) → nORMAL (NORMAL)...
- You can set the BASS, MIDDLE and TREBLE on the
USER EQ mode.
1. Select the USER EQ mode by using EQ button.
"USr EQ (USER EQ)" will be displayed in the
display window.
2. Press the ENTER button on the remote control
when "USr EQ (USER EQ)" is displayed in the
display window. "U_B0 (BASS 0)" will be displayed
in the display window.
3. Select the BASS, MIDDLE or TREBLE you want by
pressing the TUN. (-/+) buttons on the remote
control.
4. Press the PRESET (-/+) buttons on the remote
control to set the sound level you want.
(-5 ~ +5,MAX steps)
5. Repeat the 3-4 steps as above.
6. When the sound level is completed, press the
ENTER button on the remote control.
20

XTS/XTS Pro

Each time you press XTS Pro the setting changes in
the following order.
On (XTS) → NORMAL → Pro (XTS-P)...
XTS-P
The unique sound quality of the LG Technology
creates the optimum sound for you to play the
perfect playback of the original sound and to feel
the living sound source.
XTS
When playing the movie with the weak bass sound
relatively to the general music, it enforces the
sense of sound at woofer for you to satisfy with.
In the mode of 2 CH BYPASS, It creates the high
display effect by playing the sound source via the
rear speakers same as the front speakers.
Note:
The XTS mode is temporarily disabled when changing
from 2.1 CH to 5.1 CH and it is enabled when changing it
to 2.1 CH.
NORMAL
XTS-P and XTS modes turn off.

VIRTUAL sound

Press VSM to set the VIRTUAL sound.
Source Display
2.1 ch. vir
5.1 ch vir
3D STEREO
Realtime 3D positioned sound rendering
technology with stereo sources, optimized for
stereo speakers. Listeners may experience
amazing virtual surround effects with their own
multimedia players.
Multichannel sound
The Multichannel sound changes the sound in 5.1
ch into a virtual one in the 10.1 ch so that it
provides such a feeling that you listen to the sound
simultaneously from the right and left speakers and
center speaker.

Sound Mode

You can enjoy surround sound simply by selecting
one of the pre-programmed sound fields according to
the program you want to listen to (2 ch. sound only).
Press SOUND button repeatedly.
→
bPASS(BYPASS) OnStR(ON STAGE)
→ →
STU(STUDIO) CLUb(CLUB)
→
THEA(THEATER1) Chur(CHURCH)
→ →
MOVIE) PL ll-2(MUSIC)
bPASS(BYPASS)...
Note:
Initial sound mode is BYPASS.
Effect
3D STEREO
Multichannel sound
→ →
HALL(HALL)
→
PL ll-1(
→
PL ll-3(MTRX)