Installation; Attaching The Stand - Samsung S32R75 Q Series User Manual

Installation

Attaching the Stand

― Before assembling the product, place the product down on a flat and stable surface so that the screen is
facing downwards.
― The exterior may differ depending on the product.
― The table should be relocated, depending on the space where the stand will be installed.
― Attach the stand to the product and tidy up the cables.
1
Make sure the product front faces down, as shown
in the figure.
5
Install the stand on the table, as shown in the
figure.
― Before installing the stand, adjust the handle to fit
the table thickness for easier installation.
Attach and fix the stand to the rear of the product
by using the screws.
6
After installing the stand on the table, turn the
clamp to the right to engage the lock.
― If you turn it to the left, the lock will be disengaged.
Caution
Do not press down on the product. There is a risk
of damaging the product.
3
Attach the Cover-Clean Back Stand.
― Assembling the cover with excessive force may
damage the hook.
7
The stand is now completely assembled.
Before placing the product facing down to the
table, put a cushion on the table to protect the
product screen.
4
After attaching the stand to the product, tidy up
the cables.
― For details on how to tidy up cables, refer to
Up the Connected Cables."
"Tidying
20