Installing The Tv To The Wall; Detaching The Table-Top Stand From; The Tv - Sony BRAVIA KDL-50W950D Reference Manual

Installing the TV to the Wall

To Customers
Sufficient expertise is required for installing this product. Be sure to subcontract the installation to Sony
dealers or licensed contractors and pay special attention to safety during the installation. Sony is not liable
for any damages or injury caused by mishandling or improper installation, or installing any other than the
specified product. Your Statutory Rights (if any) are not affected.
To Sony Dealers and Contractors
Sufficient expertise is required for installing this product. Be sure to read this instruction manual
thoroughly to do the installation work safely. Sony is not liable for any damages or injury caused by
mishandling or improper installation.
Your TV's External Speaker will be used as a part of the Wall-Mount Bracket.
Note
• See page 2 (Safety Information) and page 6 (Precautions) on WALL-MOUNT BRACKET before carrying out Wall-Mount
Bracket installation.
• If the External Speaker is attached to the TV, detach the Table-Top Stand and External Speaker from the TV
beforehand.
• Place the TV with its screen facing down on a flat and stable surface covered with a thick and soft cloth that is larger
than the TV, when securing the Stand or when removing the Table-Top Stand from the TV to prevent damaging the
surface of the LCD display.
• Once the Table-Top Stand are detached from External Speaker, be sure to keep the Table-Top stand and screws in a
safe place.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original holes
on the rear of the TV.
Detaching the Table-Top Stand from the TV
1
Detach the cable from the TV.
Soft cloth
14
GB