Screen Saver; System Select - Optional; Displaying File Information (Id3 Tag ); Radio Operations - LG HT356SD-F2 Owner's Manual

24 Operating

Screen Saver

The screen saver appears when you leave the unit
in stop mode for about five minutes.

System Select - Optional

You must select the appropriate system mode for
your TV system. If "NO DISC" appears in the display
window, press and hold PAUSE/STEP (M) for more
than five seconds to select a system.
Displaying file information
(ID3 TAG )
While playing an MP3 file containing file
information, you can display the information by
pressing DISPLAY.
4
HT356SD-F2_BLKALL_ENG_5728.indd 24

Radio Operations

Be sure that both FM aerials are connected. (Refer
to the page 15)

Listening to the Radio

1. Press FUNCTION until FM appears in the display
window.
The last received station is tuned in.
2. Press and hold TUN.(-/+) for about two seconds
until the frequency indication starts to change,
then release. Scanning stops when the unit
tunes in a station.
or
Press TUN.(-/+) repeatedly.
3. Adjust the volume by rotating VOL. on the front
panel or by pressing VOL + or - on the remote
control repeatedly.

Presetting the Radio Stations

You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press FUNCTION until FM appears in the display
window.
2. Select the desired frequency by using TUN.
(-/+).
3. Press PROG./MEMO. a preset number will flash
in the display window.
4. Press PRESET (WS) to select the preset
number you want.
5. Press PROG./MEMO.
The station is stored.
6. Repeat the steps 2 to 5 to store other stations.

Deleting all the saved stations

1. Press and hold PROG./MEMO. for two seconds.
"ERASE ALL" will flash up on the unit display.
2. Press PROG./MEMO. to erase all of the saved
radio stations.

Improving poor FM reception

Press PLAY (d) (MO./ST.) on the remote control.
This will change the tuner from stereo to mono and
usually improve the reception.
2011-05-03 9:47:59