LG M2280DF-PZ Owner's Manual page 35

Connecting with an HDMI to DVI cable
1
Connect the DVI output of the PC to the HDMI/DVI IN1
or HDMI/DVI IN2 jack on the SET.
2
Connect the PC audio output to the AUDIO IN (RGB/
DVI) jack on the SET.
3
Turn on the PC and the SET.
4
Select HDMI 1 or HDMI 2 input source using the INPUT
button on the remote control.
!
NOTE
►If you want to use HDMI-PC mode, you must set the input label to PC mode.
►Connect the signal input cable and tighten it up by turning in
the direction of the arrow as shown in the figure.
1
2
35