Table of Contents
Advertisement
$ INPUT SELECT button (pages 27 and 30)
This button is used to switch the input signals from the connected
equipment.
% AUTO SETUP button (pages 27 and 31)
If this button is pressed while a RGB signal is being projected, the position
of the image and the settings for "DOT CLOCK" and "CLOCK PHASE" will
be adjusted automatically.
& Illumination sensor (page 42)
This sensor detects the luminance when the "DAYLIGHT VIEW" function
is operating. Do not cover the projector and do not place any object on the
projector when using it.
' LAMP indicator (page 58)
This indicator illuminates when it is time to replace the lamp unit. It flashes
if a circuit abnormality is detected.
( TEMP indicator (page 57)
This indicator illuminates if an abnormally high temperature is detected inside
the projector or around it. If the temperature rises above a certain level, the
power supply will be turned off automatically and the indicator will flash.
) PC INPUT indicator
This indicator illuminates when a signal is being input to the connector (PC
1 IN or PC 2 IN) selected using the input select buttons.
* Arrow (F F G G I I and H H ) buttons (page 38)
These buttons are used to select and adjust items in the on-screen menus.
+ ENTER button (page 38)
This button is used to accept and to activate items selected in the on-screen
menus.
, MENU button (pages 36 and 38)
This button is used to display the menu screen. When a menu screen is
being displayed, this button can be used to return to a previous screen or
to clear the screen.
- POINTER button (page 35)
This button is used to display a pointer on the projected images.
. PAGE buttons (PT-LB50NTE only)
These buttons are used when the projector is controlled by means of a
wireless network. Refer to the accessory CD-ROM for details.
/ INDEX WINDOW button (page 34)
This button can be used to split the image projection area into a still picture
and a moving picture. You can also select this function from the on-screen
menu (refer to page 53).
0 MULTI-LIVE SELECT button (PT-LB50NTE only)
This button is used when the projector is controlled by means of a wireless
network. Refer to the accessory CD-ROM for details.
(continued on next page)
E
-15
NGLISH
Advertisement
Table of Contents
