Table of Contents
Advertisement
Preparation
Remove the test
Turn on the tap and
strip from the
let the water run for
packet.
about a minute.
After determining hardness level of the supply water:
I1. Press the settings menu key after switching on your machine. After the countdown (3, 2, 1)
is displayed keep the keys pressed for a while.
2. Use menu direction selection keys to go to (r).
3. Using the Settings Menu key, adjust water hardness level according to the hardness of the
supply water. See "Water hardness level adjustment table" for correct setting.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
English Water
Level
Hardness °dE
Level 0
0-5
Level 1
6-9
Level 2
10-15
Level 3
16-19
Level 4
20-24
Level 5
25-62
In order to protect your glassware against glass corrosion in an optimal way, you have to
perform the same hardness settings, which you have made in the control panel, with the
regeneration setting switch.
For example, if you have adjusted to "3rd level" in the control panel, also set the regeneration
adjustment switch to 3rd level.
Regeneration Adjustment Switch
Dishwasher / User's Manual
Hold the test strip in
the water for about
a second.
German Water
French Water
Hardness °dH
Hardness °dF
0-4
0-8
5-7
9-13
8-12
14-22
13-15
23-27
16-19
28-34
20-50
35-90
0th Level
1
Remove the test
Wait for 1 minute.
strip from the water
and shake it.
Water Hardness Level Indicator
Press the settings menu key to set the water hardness level
to position 1 (r1).
Press the settings menu key to set the water hardness level
to position 2 (r2).
Press the settings menu key to set the water hardness level
to position 3 (r3).
Press the settings menu key to set the water hardness level
to position 4 (r4).
Press the settings menu key to set the water hardness level
to position 5 (r5).
1st Level
2nd Level
1
2
The test strip shows
you the hardness
level.
3rd Level
4th Level 5th Level
3
4
13 / 44 EN
5
Advertisement
Table of Contents
