Table of Contents
Advertisement
2) Password
Set up FTP password.
Note:
Input limitation
(1) Length: 6-20 characters
(2) Format:
I. English a-z and A-Z
II. Number 0-9
FTP password display
(1) Will show "*" symbol to instead password if set up password via
remote control.
(2) After set up, the password text will show as "*" symbol.
Before password input:
3)Storage Path
Show default path: Internal storage
Note:
Can only display Internal storage, cannot be modified.(Only show
path)
4) Port
Set up FTP port number.
Note:
Input limitation
(1) Length: Max 5 characters
(2) Range: 1025 ~ 65535
(3) Format: Number 0-9
(4) Default: 2121
(5) Unavailable port: 9988, 15220, 28123, 28124 and SICP network
port.
3. Remote Control
Via Enable/Disable to Control Remote Control On/Off
User can input Server address. If server does not registered, it will ask
user for PIN code.
Bind status:
(1) Will show network is disconnected if not yet connects to network.
(2) Will show Server is disconnected if network connected but
remote control server disconnected.
(3) Will show Server is unbinded if Remote control server feedback
unbinded status.
(4) Will show Server is binded if Sever binded successfully.
(5)Will show Error PIN code if input incorrect PIN code.
5.4.3. Source Settings
1. Media Player (Please refer to the instructions of 4.4. Media Player
introduction:)
2. Browser (Please refer to the instructions of 4.5. Browser manual)
3. CMND & Play (Please refer to the instructions of 4.7. CMND &
Play)
4. PDF Player (Please refer to the instructions of 4.6. PDF reader play)
5. Custom App (Please refer to the instructions of 4.8. Custom App)
5.4.4. Network application
1. Proxy
Enter the Host and Port of the proxy server.
2. Platform Web API
Enable / Disable Platform Web API.
31
75BDL3151T
Advertisement
Table of Contents
