LG M1950D-PZ Owner's Manual page 77

HDMI (DTV) supported mode
Horizontal
Resolution
Frequency(kHz)
720 x 480 31.469
31.500
720 x 576 31.250
1280 x 720 37.500
1280 x 720 44.960
45.000
1920 x 1080 33.720
33.750
1920 x 1080 28.125
1920 x 1080 27.000
1920 x 1080 33.750
1920 x 1080 56.250
1920 x 1080 67.430
67.500
Component supported mode
Horizontal
Resolution
Frequency(kHz)
720 x 480 15.730
720 x 480 15.750
720 x 576 15.625
720 x 480 31.470
720 x 480 31.500
720 x 576 31.250
1280 x 720 44.960
1280 x 720 45.000
1280 x 720 37.500
1920 x 1080 33.720
1920 x 1080 33.750
1920 x 1080 28.125
1920 x 1080 56.250
1920 x 1080 67.432
1920 x 1080 67.500
Component port connecting informatio
Component ports on the
Monitor set
Video output ports
on DVD player
Vertical
Frequency(Hz)
59.940
60.000
50.000
50.000
59.940
60.000
59.940
60.000
50.000
24.000
30.000
50.000
59.940
60.000
Vertical
Frequency(Hz)
59.940
60.000
50.000
59.940
60.000
50.000
59.940
60.000
50.000
59.940
60.000
50.000
50.000
59.940
60.000
Y P P
B R
Y P P
B R
Y B-Y R-Y
Y Cb Cr
Y Pb Pr
NOTE
Avoid keeping a fixed image on the set's
y y
screen for prolonged periods of time. The
fixed image may become permanently
imprinted on the screen. Use a screen saver
when possible.
There may be interference relating to
y y
resolution, vertical pattern, contrast or
brightness in PC mode. Change the PC
mode to another resolution or change the
refresh rate to another rate or adjust the
brightness and contrast on the menu until the
picture is clear. If the refresh rate of the PC
graphic card can not be changed, change the
PC graphic card or consult the manufacturer
of the PC graphic card.
The synchronization input waveform for
y y
Horizontal and Vertical frequencies are
separate.
Connect the signal cable from the monitor
y y
output port of the PC to the RGB (PC) port of
the Monitor set or the signal cable from the
HDMI output port of the PC to the HDMI/DVI
IN port on the Monitor set.
Connect the audio cable from the PC to the
y y
Audio input on the Monitor set. (Audio cables
are not included with the Monitor set).
If using a sound card, adjust PC sound as
y y
required.
If the graphic card on the PC does not output
y y
analogue and digital RGB simultaneously,
connect only one of either RGB or HDMI/DVI
IN to display the PC output on the Monitor
set.
If the graphic card on the PC does output
y y
analogue and digital RGB simultaneously,
Monitor set the Monitor set to either RGB or
HDMI. (The other mode is set to Plug and
Play automatically by the Monitor set.)
DOS mode may not work depending on the
y y
video card if you use an HDMI to DVI cable.
If you use too long an RGB-PC cable that is
y y
too long, there may be interference on the
screen. We recommend using under 5 m of
cable. This provides the best picture quality.
77
SPECIFICATIONS