Using The Computer - LG L1932P-SF User Manual

Connecting the Display

Using the Computer

1.
Place the monitor in a convenient, well-ventilated location near your computer. To adjust
height of your monitor, unlock the stand lock on top of the stand.
2.
Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection.
3.
Connect the power cord into a proper power outlet
that is easily accessible and close to the display.
NOTE
This is a simplified
representation of the rear view.
This rear view represents a
general model; your display
may differ from the view as
shown.
4.
Press
on. When monitor power is turned on, the 'Self Image
Setting Function' is executed automatically.
(Only Analog Mode)
NOTE
'Self Image Setting Function'? This function provides the user with optimal display settings. When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push
the 'AUTO/SET' button on the front panel of the monitor. Otherwise, you may execute the ' Factory reset' option on
the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'Language'.
Signal Cable
Power Cord
Analog signal
D-sub
Varies according to model.
Wall-outlet type
MAC
PC
button on the front switch panel to turn the power
Digital signal
DVI
2
PC-outlet type
PC
Mac adapter
For Apple Macintosh use, a separate plug adapter is
needed to change the 15 pin high density (3 row) D-sub
VGA connector on the supplied cable to a 15 pin 2 row
connector.
A5
1