Advertisement
Crimps
Straight sleek style
and flicks
Before you style your hair:
1 Ensure arrow on the ring is pointing at unlock icon on the handle
(
).
2 Slide a suitable attachment onto the metal tube (
(
) and turn the ring to the right/anti-clockwise to lock it (
•
To remove the attachment, turn the ring to the left/clockwise to
unlock (
3 Connect the plug to a power supply socket.
4 Slide the on/off switch (
» The power-on indicator (
» When the appliance is ready for use, the indicator stops blinking.
5 Place the appliance with the support (
surface.
6 Comb your hair and divide your hair into small sections that are not
wider than 2-4cm.
Create curls or ringlets (Fig.4)
1 Select small curling attachment (
ringlets.
2 Press the lever (
hair between the clip and barrel (
•
If you use the Slip-on spiral attachment (
wind the section of hair round the barrel following the spiral
profile. (Fig.6)
3 Release the lever and slide the barrel to the hair tip.
Crimping/straightening attachment (
curved surfaces (
other
Crimping/straightening attachment (
flat surfaces(
) and pull it off.
) to I to switch on the appliance.
) to open the clip (
) facing towards each
) facing towards each other
) lights up and starts blinking.
) on a heat-resistant
) for styling tight curls and
) and place a section of
).
) of the handle
) to create ringlets,
) with
) with
).
Advertisement
