Samsung HW-KM39 User Manual page 11

+ Controlling the Soundbar using your tV remote Control
1. Press and hold the
2. "on - TV remoTe" appears on the Soundbar's display.
3. In the TV's menu, set the TV speaker to external speaker.
● only the VOL +/- and
● TV menus differ by manufacturer and model. refer to the TV's user manual for further information.
● This function is not available when the Soundbar is in the TV SoundConnect mode.
● manufacturers supporting this function:
- VIZIo, LG, Sony, Sharp, PHILIPS, PanaSonIC, ToSHIBa, GrUnDIG, Hisense, rCa
- This function may not be compatible with your TV's remote depending on the remote control's manufacturer.
● To turn off this function, press the
"off - TV remoTe" appears on the Soundbar's display.
inStaLLing tHe Battery in tHe reMOte COntrOL
1. Use a suitable coin to turn the
remote control's battery cover
counterclockwise to remove it
as shown in the figure above.
SOUnD button for more than 5 seconds while the Soundbar is turned on.
(mute) buttons are available to control the Soundbar.
SOUnD button for 5 seconds.
2. Insert a 3V lithium battery. Keep the
positive (+) pole facing up when inserting
the battery. Put the battery cover on and
align the '●' marks side by side as
shown in the figure above.
11
DESCRIPTIONS
3. Use a suitable coin to
turn the remote control
battery cover clockwise
as far as it will go to fix it
in place.