Page 1
VIZIO USER MANUAL Model D43-E2, D50-E1, D55-E0, & D65-E0...
Page 2
Misuse may result in electric shock or fire. To prevent your TV from To get the most out of your new VIZIO product, read these instructions avoid injury from tip-over. being damaged, the following instructions should be observed for the before using your product and retain them for future reference.
Page 3
• Do not apply pressure or throw objects at your TV. This may cause fire or electric shock. • Install the TV where it cannot be pulled, pushed or knocked over. compromise the integrity of the TV. The manufacturer’s warranty •...
Page 4
TELEVISION ANTENNA CONNECTION PROTECTION If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Ground Clamp Article of the ational lectrical ode, A SI...
Page 5
or DTS patents, see http patents.dts.com. Manufactured under license from Dolby Laboratories. or DTS patents, see http patents.dts.com. Dolby, Dolby Audio, and the double-D symbol are Manufactured under license from DTS icensing imited. Manufactured under license from DTS icensing imited. trademarks of Dolby Laboratories.
Restoring the TV to Factory Default Settings.........38 Setting the Auto ower Off eature ..........24 Using the Info Window ...............39 Blanking the Screen.................24 Using VIZIO Internet Apps Plus (V.I.A. Plus) .....38 ® Finding MAC Addresses for Network Setup........25 Using the Fullscreen V.I.A. Window ...........39...
Getting to Know Your TV REMOTE SENSOR & POWER INDICATOR When using the remote, aim it directly at this sensor. The power indicator ashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see Turning the ower Indicator On or Off. FRONT PANEL...
Page 8
Ethernet - Connect an Ethernet cable to modem/ router. Coaxial - onnect a coaxial cable from cable, satellite, or antenna. Optical Audio Out - onnect an optical S DI audio device, such as home audio receiver. USB - onnect a S thumb drive to play photo, music, or video. Components - onnect a component or composite devices.
Page 9
Use only with a UL-listed wall mount bracket rated for the weight load of this TV. Installing a Television on a wall requires lifting. To prevent in ury or damage to the TV, ask someone to help you. D43-E2 D50-E1 D55-E0 D65-E0 Screw Si e...
Number Pad - Manually enter a channel. Enter - onfirm channel or passcode entered using the number hen needed, VIZIO recommends replacing the batteries that came pad. with this remote with two, new Duracell ‘AAA’ alkaline batteries.
Completing The First-Time Setup The first time you turn on the TV, the Setup App will guide you through each of the steps necessary to get your TV Choose your mode. Select Store Demo for in-store display. ready for use. Select Home Use for in-home use.
Page 12
If the TV Signal channel scan screen appears, the TV will need to scan for channels, which takes several minutes. Use the arrow buttons on the remote to highlight Begin Scan and press OK. Note: Number of ports may differ by TV. Otherwise, use the Arrow and OK buttons on the remote to select the input your TV source is connected to.
Page 13
ACCESSIBILITY SETTINGS VIZIO is committed to providing intuitive, user-friendly products. our new VIZIO TV offers several accessibility features that can help you get the most out of it. To access the Accessibility menu: ACCESSIBILITY Press the Menu button on the remote control.
From this menu, you can: Use the Arrow buttons to highlight the Input menu. • Adjust the Picture settings a menu option, and press the OK VIZIO button to select that option. To change the input source: • Adjust the Audio settings •...
CHANGING THE SCREEN ASPECT RATIO Tip: The aspect ratio cannot be changed for Ultra HD The TV can display images in five different modes ormal, Stretch, content or for any video content on HDMI-5. Panoramic, Wide, and Zoom. Each mode displays the picture differently.
ADJUSTING THE PICTURE SETTINGS 3. Use the Arrow buttons on the 4. To manually change each of the picture settings, use the Up/ VIZIO remote to highlight Picture Down Arrow buttons on the remote to highlight that picture Mode, then use the Left/Right...
1. From the PICTURE menu, use the To adjust the color temperature: Arrow buttons to highlight More adjust the vertical size of the displayed picture. Press the VIZIO VIZIO Picture, and then press OK. OK button when you are finished.
To adjust the Picture Mode Edit settings: 1. From the PICTURE MODE EDIT • The custom picture mode is not automatically saved. VIZIO 1. From the PICTURE menu, use the menu, use the Arrow buttons VIZIO Arrow buttons to highlight Picture...
Deleting a Custom Picture Mode Custom picture modes that are no longer needed can be deleted. Inputs assigned to a deleted custom picture mode become assigned to the Calibrated picture mode. To delete a custom picture mode: 1. From the PICTURE MODE EDIT menu, use the Arrow buttons to highlight To delete the user created Custom 1 picture mode, Delete Picture Mode, and then...
Adjusting the Color Tuner Settings To turn color channels off and on To adjust the 11 Point White Balance settings: The Color Tuner settings allow you to adjust the HSB color and 11 1. From the COLOR CALIBRATION menu, use the Arrow buttons 1.
Page 21
To show or hide the SMPTE Test Pattern: To show or hide the Flat Test Pattern: To show or hide the Ramp Test Pattern: 1. From the Color Tuner menu, use the Arrow buttons to 1. From the Color Tuner menu, use the Arrow buttons to 1.
1. Press the MENU button on the To select a pre-set audio mode: home theater audio system. Select Auto, PCM, Dolby D or VIZIO remote. The on-screen menu Bitstream. 1. Press the MENU button on the remote. The on-screen menu is AUDIO is displayed.
Deleting the Custom Audio Mode To delete the custom audio mode that has been created: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK.
1. Press the MENU button on the 1. From the TIMERS menu, use the Up/Down Arrow buttons on the remote to highlight Blank Screen and press OK. VIZIO remote. The on-screen menu is the remote to highlight Auto o er displayed.
To find the TV s MA address To connect to a wireless network whose network name (SSID) is be- 1. From the NETWORK menu, highlight ing broadcast: VIZIO Manual Setup and press OK. The 1. From the NETWORK menu, highlight Manual Setup and press MANUAL SETUP MANUAL SETUP menu is displayed.
Page 26
1. From the NETWORK menu, highlight Test Connection and 1. From the NETWORK menu, press OK. VIZIO highlight Hidden Network and ENTER ACCESS POINT NAME press OK. The ENTER ACCESS 2. The TEST CONNECTION screen displays the connection...
You can use the TV’s Channels menu to: Antenna (Over-the-air) or Cable (Out-of-the-wall) connections. • Select a Channel Source 1. From the CHANNELS menu, highlight Channel Source and VIZIO • Find Channels press OK. The CHANNEL SOURCE menu displays. CHANNELS •...
See Locking and Unlocking Channels . To remove a channel: 1. From the CHANNELS menu, highlight Skip Channel, and VIZIO press OK. The SKIP CHANNEL SKIP CHANNEL menu is displayed. Wide...
LISTENING TO ALTERNATE AUDIO To use the Digital Audio feature: 1. From the CHANNELS menu, Changing the Analog Audio Language highlight Digital Audio and VIZIO press OK. The DIGITAL AUDIO Some analog over-the-air (free) and cable channels broadcast DIGITAL AUDIO menu is displayed.
TV will not display them. 1. From the CLOSED CAPTIONS • Window Opacity - Change the opacity of the closed VIZIO menu, use the Arrow buttons to captioning box. highlight Digital Style and press DIGITAL STYLE...
Page 31
Typical choices include: Background • Opaque background, transparent window—Only a strip of Text background appears behind the text, expanding as the text appears. This is the typical "As Broadcast" mode. • Opaque background and window in the same color—When text appears, the entire line fills with color at once. In the example below, the closed caption text is green, the background is black, and the window is red.
To change the name of an input: 1. Press the MENU button on the remote. The on-screen menu is displayed. VIZIO 2. Use the Arrow buttons on the remote to highlight Devices and NAME INPUT press OK. The DEVICES menu is displayed.
TV can display the on-screen menu in different languages. Using the System menu, you can: network connection: To change the on-screen menu language: VIZIO • View system information 1. Press the MENU button on the remote. The on-screen menu is SYSTEM 1.
1. Press the MENU button on the The Parental Controls menu only appears when: To enable or disable the Program Rating feature: VIZIO remote. The on-screen menu is • You are using the tuner to receive your TV signals, such as June 11, 2015 11:48AM 1.
Blocking and Unblocking Content by Rating Changing the Parental Control PIN Resetting the Content Locks A channel may sometimes broadcast programs that are meant for If you use the parental controls, you should change the PIN to To reset the content locks to the factory-default settings: children, and at other times broadcast programs that are meant prevent children from accessing inappropriate material.
If the program is already formatted for widescreen viewing 1. Press the MENU button on the (1.85:1 or 2.35:1), then black bars will appear on the top VIZIO remote. The on-screen menu is Some programs have black bars on the top or sides of the picture and bottom of the display image.
The Power Indicator on the front of your TV normally does not glow connected to HDMI (ARC) input with the included remote, without when the TV is on. You can change this setting if you prefer the light any programming. Using CEC, your VIZIO TV remote can control: to be on. •...
2. Use the Arrow buttons on the TV Name remote to highlight System and Store Demo press OK. The SYSTEM menu is VIZIO Privacy Policy displayed. Exit Viewing Data 3. Highlight Reset & Admin and press OK. The RESET & ADMIN menu is displayed.
USING THE INFO WINDOW The Info Window can be displayed by pressing the INFO or GUIDE button on the remote: • Press the INFO or GUIDE button one time to display channel, input, and display information. • Press the INFO or GUIDE button two times to display the program title, program rating, audio information, and the start and end times of the program.
Using VIZIO Internet Apps Plus (V.I.A. Plus) ® VIZIO Internet Apps Plus (V.I.A. Plus) delivers popular online content ® to your TV. V.I.A. Plus features a selection of Apps that allow you to watch movies and TV shows, listen to music, get weather and news information, and more–all on demand.
USING THE FULLSCREEN V.I.A. WINDOW The Fullscreen V.I.A. Plus window allows you to add and store Apps. The Apps on the first page are displayed in the Dock and Apps on additional pages can be moved to the Dock. To open the Fullscreen V.I.A. Plus Window: 1.
FULLSCREEN V.I.A. PLUS WINDOW OVERVIEW The Fullscreen V.I.A. Plus Window allows you to add, delete and organize your Apps. The My Apps tab displays Apps that are already installed on your TV. The Apps on the first page are displayed in the V.I.A.
CUSTOMIZING THE V.I.A. PLUS WINDOW Deleting an App from the My Apps Tab Moving an App in My Apps To delete an app from your TV: You can organize your Apps on your My Apps tab by moving them You can add, delete, and move apps around on your My Apps tab where you want.
Page 44
3. Use the Arrow buttons to move the app to the desired location and press OK to place the app. When you can move the app, it appears as shown below. Note: App location, appearance, and availability subject to change without notice. Cursor showing the location that the app will move to...
Using the USB Media Player Using the USB Media Player Preparing Your USB Drive to Play USB Media Removing the USB Drive from the TV To display S media, you must first save your photos onto a S Media layer allows you to connect a S thumb drive to To safely remove your S drive from the TV thumb drive...
Page 46
OK to return to browse files and folders the previous screen. Current Folder using the Arrow and OK Displays the folder path. buttons on the remote. Connected Sources VIZIO Displays VIZIO_2GB\Photo\root Photo connected S USB1: devices. Current Folder root A.jpg...
Troubleshooting & Technical Support Do You Have Questions? Find Answers At SUPPORT.VIZIO.COM Find help with: • New Product Setup • Connecting Your Devices • Technical Problems • Product Updates • And More Live Chat Support Available You can also contact our...
Page 48
Customized Support Get assistance quickly with your information on-hand. News & Offers Take advantage of the latest news and special offers from VIZIO. Safety & Satisfaction Stay up to date with important product updates and notifications. REGISTER YOUR VIZIO PRODUCT NOW...
Page 49
Select a pre-set picture mode. See Adjusting the Picture • high level of technology. However, sometimes pixels may see your device’s user manual for details. Settings . VIZIO recommends selecting Calibrated. not display correctly. These types of occurrences are • Adjust Brightness, Contrast, or Backlight. See Adjusting •...
Page 50
I see “noise” or static on the screen. • When your TV’s digital capabilities exceed a digital broadcast signal, the signal is up-converted (improved) to match your TV’s display capabilities. This up-converting can sometimes cause irregularities in the image. • If you are using an antenna, the signal strength of the channel may be low.
Page 51
S ecificatio s D43-E2 D43-E2 Scree Si e 43" e ote o tro XRT122 ie a e Area 42.51" C-US, CSA, FCC Class B, BETS-7/ICES-003 Class B, ertificatio s IC, HDMI (CEC, ARC), Dolby Audio Di e sio s Sta d 38.17”...
Page 52
D50-E1 D50-E1 Scree Si e 50" e ote o tro XRT122 ie a e Area 49.5" C-US, CSA, FCC Class B, BETS-7/ICES-003 Class B, ertificatio s IC, HDMI (CEC, ARC), Dolby Audio Di e sio s Sta d 44.40” x 27.97” x 10.04” (112.78 x 71.04 x 25.5 cm) o Sta d 44.40”...
Page 53
D55-E0 D55-E0 Scree Si e 55" e ote o tro XRT122 ie a e Area 54.6" CSA, FCC Class B, BETS-7/ICES-003 Class B, ertificatio s IC, HDMI (CEC, ARC), Dolby Audio Di e sio s Sta d 48.98” x 30.69” x 10.59” (124.4 x 77.95 x 26.91 cm) o Sta d 48.98”...
Page 54
D65-E0 D65-E0 Scree Si e 65" e ote o tro XRT122 ie a e Area 64.5" CSA, FCC Class B, BETS-7/ICES-003 Class B, ertificatio s IC, HDMI (CEC, ARC), Dolby Audio Di e sio s Sta d 57.67” x 35.76” x 11.34” (146.47 x 90.84 x 28.81 cm) o Sta d 57.67”...
Regulatory Information FCC Class B Radio Interference Statement Notice Canada Notice for License-Exempt Radio Apparatus NOTE: This equipment has been tested and found to comply with The changes or modifications not expressly approved by the party This device complies with Industry Canada’s license-exempt RSSs. the limits for a Class B digital device, pursuant to Part 15 of the FCC responsible for compliance could void the user’s authority to Operation is subject to the following two conditions: (1) This device...
“FACTORY RECERTIFIED”, or by a non-authorized reseller. binding arbitration agreement and class action waiver affect your rights When you return a product to a VIZIO service center, you must ship the under this warranty. Please read the text under the section titled “Binding...
Page 57
General the product, and (d) a clear statement that you wish to opt out of the No employee or agent of VIZIO may modify this warranty. If any term of this binding arbitration agreement and class action waiver. warranty, other than the class action waiver, is found to be unenforceable,...
OF PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED 9:00AM to 6:00PM Monday through Friday, Central Standard Time. All other VIZIO products must be sent to a VIZIO service center to RETAILER WHERE YOU PURCHASED IT. obtain warranty service. VIZIO is not responsible for transportation...
Page 59
EXCLUSION MAY NOT APPLY TO YOU. PRESIDENTE MASARYK 111, Of 152 – Of 111 VIZIO is not obligated to honor the warranty in the following cases. IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND COL. POLANCO V SECCIÓN...