Troubleshooting; General; Picture - LG ST600 Owner's Manual

44

Troubleshooting

Troubleshooting

General

Symptom
No Power.
Cannot play movie, photo or
audio files.
The remote control does not
work properly.
The connected USB storage
device is not recognized.
5

Picture

Symptom
There is no picture.
Picture noise appears
Cause & Solution
y Plug the power cord into the wall outlet securely.
y The files are not recorded in a format that the unit can play.
y The unit does not support the codec of the video file.
y The remote control is not pointed at the remote sensor of the unit.
y The remote control is too far from the unit.
y There is an obstacle in the path of the remote control and the unit.
y The batteries in the remote control are exhausted.
y Try another different USB cable, some of USB cable may not support
enough current for normal USB operation.
y If you use a USB extension cable or USB HUB, the USB devices may not
be recognized.
y An USB device which requires additional program installation when
you have connected it to a computer is not supported.
y This unit supports only USB Flash Drive and USB External HDD with
FAT16, FAT32 or NTFS format.
Cause & Solution
y Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
y Check the [HDMI Color Setting] in the [Setup] menu is set to the
appropriate item that conforms to your video connection.
y Your TV may not suppot the resolution you have set on the unit.
Change the resolution that your TV accepts.
y The player's HDMI OUT jack is connected to a DVI device that does
not support copyright protection.
y Set the resolution which your TV accepts.