Radio Operations; Listening To The Radio; Presetting The Radio Stations; Deleting All The Saved Stations - LG HT806TH Owner's Manual

Radio Operations

Be sure that both FM aerials are connected. (Refer
to the page 21.)

Listening to the radio

1. Press P RADIO&INPUT until FM appears in
the display window.
The last received station is tuned in.
2. Press and hold TUNING (-/+) for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Press TUNING (-/+) repeatedly.
3. Adjust the volume by rotating VOLUME on
the front panel or by pressing VOL (+/-)on the
remote control repeatedly.

Presetting the Radio Stations

You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press P RADIO&INPUT until FM appears in
the display window.
2. Select the desired frequency by using TUNING
(-/+).
3. Press b ENTER a preset number will flash in
the display window.
4. Press PRESET (-/+) to select the preset number
you want.
5. Press b ENTER.
The station is stored.
6. Repeat the steps 2 to 5 to store other stations.

Deleting all the saved stations

1. Press and hold CLEAR for two seconds.
"ERASE ALL" will flash up on the unit display.
2. Press CLEAR to erase all saved of the radio
stations.
HT806TH-D0_BGBRLL_ENG_4790.indd 33
or

Deleting a saved station

1. Press PRESET - / + to Select a preset number
you want to delete.
2. Press CLEAR, the preset number will blink in the
display window.
3. Press CLEAR again, to delete the selectd preset
number.

Improving poor FM reception

Press d PLAY, MONO/STEREO on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.
Seeing information about a
radio station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about
the radio station being listened to. Press RDS
repeatedly to cycle through the various data types.
PS
( Programme Service Name)
The name of the channel will appear in
the display
PTY
( Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
RT ( Radio Text)
A text message contains special
information from the broadcast station.
This text may scroll across the display.
CT
( Time controlled by the channel)
This shows the time and date as
broadcast by the station.
You can search the radio stations by programme
type by pressing RDS. The display will show the last
PTY in use. Press PTY one or more times to select
your preferred programme type. Press AD. The
tuner will search automatically, when a station is
found the search will stop.
Operating 33
4
2011-03-09 10:25:51