Fig. 111: Fitting The Upper Fastening Strips; Fig. 112: Fitting The Bottom Fastening Strip; Table 70: Tightening Torque (51007) - ABB HT611078 Operation Manual

Operation Manual / A150-M56/66/57/67 - A155-M..
12 Dismantling and fitting, special tools for fastening strips / 12.1 Ap-
plication, special tools
Fitting the fastening strips
Fig. 111: Fitting the upper fastening strips
Product
A150
A155
Table 70: Tightening torque (51007)
1. Fit the nuts (51007) of the (upper) fastening strips (51002) illustrated and tighten with a
torque spanner (02) without a spanner holder. Observe the tightening torque.
Fig. 112: Fitting the bottom fastening strip
2. Position the collection tub (01) to catch any fixing elements if they fall.
3. Tighten the two nuts on one side by using the spanner holder (90165).
4. Tighten the two nuts on the other side by using the spanner holder (90166).
The cartridge group is fitted at this point in time. To enable a clear representation of the
work step, the cartridge group is not illustrated in work step 5.
© Copyright 2022 ABB. All rights reserved.
Size
M16
M16
HZTL4032_EN
Tightening torque [Nm]
175
175
Rev.S February 2022