Sound - Philips 49PFL4609 User Manual

Sound

Before you begin:
You must set Home in Location. L p. 38
Otherwise, personalized Picture and Sound settings will not be
memorized after the Unit goes into Standby Mode.
1
Press Q (MENU) and use H I J K to select Setup then press
OK.
2
Use H I to select Sound, then press OK.
Auto sound
Settings assistant
Equalizer
Picture
Balance
Sound
DTS TruSurround
Features
Auto volume leveling
Installation
Software TV speakers
Headphone volume
Digital output format
3
Use H I J K to select the item you want to adjust, then press
OK.
The following sound settings can be configured. Depending on the format
of the broadcasting, some sound settings are not available.
to select the desired Setting, then press OK.
(Personal, Standard, Vivid, Sports, Movie, Music
and News)
Auto sound
When you adjust the following settings
(Equalizer, DTS TruSurround and Auto volume
leveling), Personal sound will be set
automatically.
Adjust the tonal quality for each frequency.
J Cursor
Equalizer
to select the specific frequency using H I, and
use J K to Adjust the Level, then press OK.
Adjust the speakers to suit your listening preference.
J Cursor
Balance
Adjusts the balance of the Right and Left speakers
to Best suit your listening position.
Digital TV Operation
You can select the Audio language while your TV is receiving the Digital
broadcasting.
to select the language according to your
Digital audio
preference.
language
(It differs depending on the program.)
Cable / NTSC (Analog) TV Operation
You can select Main or SAP while your TV is receiving the Analog
broadcasting that has the SAP (Second Audio Program).
(It differs depending on the program.)
Main
Alternate audio
SAP
Personal
Start now
Off
Off
On
PCM
Cursor K
Cursor K
to output main-audio
to output second-audio program
Cable / NTSC (Analog) TV Operation
When you set to Main in Alternate audio above, you can select Mono
or Stereo if the Analog broadcasting is sending the MTS (Multichannel
television sound).
Mono
Mono/Stereo
Stereo
This selects Sound modes for more Spatial or Surround sound
reproduction.
Off
DTS TruSurround
On
This function keeps a constant Loudness differential between the TV
Commercials and the Programs.
Off
Auto volume
leveling
On
You can select the Audio Output from the unit's speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI
cable to this unit, some sound operations such as volume up can be
changed by using this unit's remote control. Make sure Master EasyLink
is set to On. L p. 39
Off
On
TV speakers
Speakers
EasyLink
Adjust Headphone volume.
J Cursor
Headphone
volume
to Decrease or Increase volume
You can set the Digital Audio output format from SPDIF/ARC.
PCM
Digital output
format
Bitstream
If a Channel or Input device is too loud or too soft, navigate to that
Channel or Input device.
J Cursor
to set a Negative Delta
Delta volume
volume level as per
your personal
preferences
Note(s)
Alternate audio and Mono/Stereo are not available when you watching TV programs with
●
a cable box or satellite set-top box connected through an HDMI cable or Component /
Composite Video cables.
32
to Output Mono-audio.
to Output Stereo-audio.
to set DTS TruSurround™ to Off
to set DTS TruSurround™ to On
to Remove the Auto volume
leveling
to Reduce Volume Differences
between the TV Commercials and
the Programs
No Output Sound from the Unit's
Speakers
to Output Sound from the Unit's
Speakers
to control Audio Output from
your connected EasyLink
Compliant Devices with VOL + /
- by using this Unit's remote
control.
Cursor K
to Output PCM format.
to Output Audio in its native
format as Bitstream to connected
Audio receiver.
Cursor K
to set a Positive Delta
volume level as per
your personal
preferences
Continued on next page.
.
English