Magic Remote Functions - LG 60LF6350 Owner's Manual

Control buttons ( , , ,
SIMPLINK compatible devices (USB,SIMPLINK).
Starts to record and displays record menu.

Magic Remote Functions

(Depending upon model)
Magic remote control battery
When the message
is low. Change the battery.
battery. To install batteries, open the battery cover,
replace batteries (1.5 V AA) matching
to the label inside the compartment, and close the
battery cover. Failure to match the correct polarities
of the battery may cause the battery to burst or
leak, resulting in fire, personal injury, or ambient
pollution. Be sure to point the remote control at
the remote control sensor on the TV. To remove the
batteries, perform the installation actions in reverse.
This remote uses infrared light. When in use, it
should be pointed in the direction of the TV's remote
sensor.
CAUTION
y Do not mix old and new batteries,
y
as this may damage the remote control.
A
(POWER) Turns the TV on or off.
Navigation buttons (up/down/left/right)
Press the up, down, left or right button to scroll
the menu. If you press
pointer is in use, the pointer will disappear from the
screen and Magic Remote will operate like a general
remote control. To display the pointer on the screen
again, shake Magic Remote to the left and right.
(BACK) Returns to the previous screen.
(Home) Accesses the Home menu.
Wheel (OK) Press the center of the Wheel button
to select a menu. You can change channels by using
the Wheel button.
(EXIT to LIVE) Switches among broadcast
(antenna) and various inputs.
(Voice recognition)
12
, ) Controls the
is displayed, replace the
and ends
A
buttons while the
Network connection is required to use the voice
recognition function.
1. Press the voice recognition button.
2. Speak when the voice display window appears on
the left of the TV screen.
* Use the Magic remote no further than 10 cm from
your face.
* The voice recognition may fail when you speak too
fast or too slowly.
* The recognition rate may vary depending upon
the user's characteristics (voice, pronunciation,
intonation, and speed) and the environment (noise
and TV volume).
Color buttons These access special functions in
some menus. ( Red,
Blue)
B
Adjusts the volume level.
Displays the Screen Remote.
* Accesses the Universal Control Menu in some
regions.
* Pressing and holding the
menu to select an external device that is connected
to the TV.
Used for viewing 3D video. (For 3D models)
(MUTE) Mutes all sounds.
Scrolls through the saved channels.
Registering Magic Remote
The Magic Remote operates by pairing with your TV.
How to register the Magic Remote
To use the Magic Remote, first pair it
with your TV.
1 Put batteries into the Magic Remote
and turn the TV on.
2 Point the Magic Remote at your TV
and press the
remote control.
(Wheel)
* If the TV fails to register the Magic
Remote, try again after turning the TV
off and back on.
Green, Yellow,
B
button will display a
Wheel (OK) on the