Table of Contents
Advertisement
16
ASSEMBLING AND PREPARING
Securing the TV to a wall (optional)
(Depending on model)
1
Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to
the wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets
tightly with a sturdy rope.
Make sure to keep the rope horizontal with
the flat surface.
CAUTION
Make sure that children do not climb on or
y
hang on the TV.
NOTE
Use a platform or cabinet that is strong
y
and large enough to support the TV
securely.
Brackets, bolts and ropes are optional.
y
You can obtain additional accessories from
your local dealer.
Tidying cables
1
Gather and bind the cables with the cable
holder on the back of the TV.
Cable Holder
2
Gather and bind the cables with the cable
management clip.
Cable Management Clip
CAUTION
Do not move the TV by holding the cable
y
holder and cable management clip, as the
cable holders may break, and injuries and
damage to the TV may occur.
Advertisement
Table of Contents
