Philips Sonicare DiamondClean HX9337 Manual page 40

English
1
2
3 Hold the top of the handle with one hand
and strike the handle housing 0.5 inch
above the bottom end. Strike firmly with
a hammer on all 4 sides to eject the end
cap.
Note: You may have to hit on the end
several times to break the internal snap
connections.
4 Remove the end cap from the toothbrush
handle. If the end cap does not release
easily from the housing, repeat step 3
until the end cap is released.
5 Holding the handle upside down, press
the shaft down on a hard surface. If the
internal components do not easily release
from the housing, repeat step 3 until the
internal components are released.
6 Remove the rubber battery cover.
7 Wedge the screwdriver between the
battery and the black frame at the bottom
of the internal components. Then pry
the screwdriver away from the battery to
break the bottom of the black frame.
39