General Guide
Timeout
If you do not perform any operation for a while configuring
settings, the display will return to the previous screen
automatically.
Using the 10-key Pad (9)
Use the number buttons and the [–] and [+] keys to change
displayed numbers and settings.
Number Buttons
Use the number buttons to enter numbers and values.
• Enter the same number of digits as the currently displayed
value.
Example: To enter tone number 004, input 0 3 0 3 4.
Using the FUNCTION Button (bm)
Use this button to change the volume level and pitch, and to configure other settings.
1.
Press bm FUNCTION.
2.
Next, press bm FUNCTION the number of times required to select the setting you want to change.
Each press of bm FUNCTION cycles through the available parameters.
• You can also scroll back through settings by holding down bm FUNCTION and pressing bn EASY MODE.
bm key
Parameter
presses
1
Transpose
2
Accompaniment
Volume
3
Song Volume
4
Dance Music
Volume
5
Dance Music
Sync Type
EN-4
Display
Trans.
Changes (transposes) overall instrument tuning by semitone units.
–12 to +12 (semitone units, one octave up/down)
AcompVol
Changes the Auto Accompaniment volume.
Song Vol
Changes the song playback volume.
DM Vol.
Changes the dance music song playback volume.
DM Sync
Sets the timing of dance music syncing.
1: No misalignment of phrase playback between each part, regardless of pattern
phrase switch timing.
2: Start pattern phrase playback to match timing of the pattern switching
keyboard key. If there is misalignment with the playback timing of the pattern
phrase between parts, alignment will be adjusted automatically measure-by-
measure as playback proceeds.
• Negative values cannot be input using the number buttons.
Use [+] (increase) and [–] (decrease) instead.
[–] and [+] Keys
You can use the [+] (increase) and [–] (decrease) keys to
change the displayed number or value.
• Holding down either key scrolls the displayed setting.
• Pressing both keys at the same time will revert to the initial
default setting or the recommended setting.
Description