Troubleshooting - LG DV690H Owner's Manual

5 Troubleshooting

Troubleshooting
Symptom
No power. The power cord is disconnected.
The unit does not An unplayable disc is inserted.
start playback.
The rating level is set.
The remote The remote control is not pointed
control does not at the remote sensor on the unit.
work properly.
The remote control is too far from
the unit.
Poor picture Fingerprints and dust is stained
quality and sound on the disc.
distortion
No picture.
The TV is not set to receive the
signal from the unit.
The video cable is not connected
securely
The TV does not accept the
resolution that is set on the unit.
No sound.
The equipment connected with
the audio cable is not set to
receive the signal from the unit.
The AUDIO options are set to the
wrong position.
Cause
Plug the power cord.
Insert a playable disc. (Check the disc type and
regional code.)
Change the rating level.
Point the remote control at the remote sensor
of the unit.
Operate the remote control closer to the unit.
Wipe the disc from the center to out with
a clean cloth. Do not use strong solvents
(alcohol, benzine, thinner, commercially
available cleaners)
Select the appropriate video input mode on
the TV.
Connect the video cable securely.
Press RESOLUTION repeatedly to select
appropriate resolution till TV accepts it.
Select the correct input mode of the audio
amplifier.
Set the AUDIO settings to the correct position.
Troubleshooting 17
Solution
5