PREPARATION
FRONT PANEL CONTROLS
NOTE
►TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.
► The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
CAUTION
► Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-
ments of glass, or the TV may fall.
► Do not drag the TV. The floor or the product may be damaged.
■ Image shown may differ from your TV.
Only 19/22/26LE3 *** , 22/26LE5 ***
PROGRAMME
Only 32LE3 *** , 32/37/42/47/55LE5 ***
PROGRAMME
A-34
Only 32/37/42LE4 ***
Power/Standby Indicator
Note: You can turn the Power Indicator on
or off in the OPTION menu.
SPEAKER
VOLUME
MENU
POWER
OK
INPUT
VOLUME
MENU
OK
INPUT
Touch Sensor
You can use the desired button
•
function by touching.
Power/Standby Indicator
Illuminates red in standby mode.
•
•
The LED is off while the TV remains on.
Remote Control Sensor
Only 32/37/42LE4 *** , 32/37/42/47/55LE5 ***
POWER
Power/Standby Indicator
Note: You can turn the Power Indicator on
or off in the OPTION menu.
Only 32/37/42LE4 ***
PROGRAMME
P
VOLUME
OK
OK
MENU
MENU
INPUT
INPUT
/ I
POWER
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.