Advertisement

Quick Links

Return your Warranty Registration card today to ensure
you receive all the benefits you're entitled to.
Once your PHILIPS purchase is registered, you're eligible to receive all the privileges of owning a
PHILIPS product. So complete and return the Warranty Registration Card enclosed with your
purchase at once, and take advantage of these important benefits.
Warranty
Verification
Registering your product within
10 days confirms your right to
maximum protection under the
terms and conditions of your
PHILIPS warranty.
Congratulations on your purchase, and
welcome to the "family!"
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS.You've selected one of
the best-built, best-backed products available today. And we'll do
everything in our power to keep you happy with your
purchase for many years to come.
As a member of the PHILIPS "family," you're entitled to
protection by one of the most comprehensive warranties and
outstanding service networks in the industry.
What's more, your purchase guarantees you'll receive all the
information and special offers for which you qualify, plus easy
access to accessories from our convenient home shopping
network.
And most importantly you can count on our uncompromising
commitment to your total satisfaction.
All of this is our way of saying welcome-and thanks for investing
in a PHILIPS product.
Sincerely,
Lawrence J. Blanford
President and Chief Executive Officer
P .S. Remember, to get the most from your PHILIPS
product, you must return your Warranty
Registration Card within 10 days. So please mail
it to us right now!
Owner
Confirmation
Your completed Warranty
Registration Card serves as
verification of ownership in the
event of product theft or loss.
Visit our World Wide Web Site at http://www.philips.com
Model
Registration
Returning your Warranty Registration
Card right away guarantees you'll
receive all the information and special
offers which you qualify for as the
owner of your model.
Know these
safety
symbols
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This "bolt of lightning" indicates
t
uninsulated material within your unit
may cause an electrical shock. For the
safety of everyone in your household, please
do not remove product
covering.
The "exclamation point" calls attention
s
to features for which you should read
the enclosed literature closely to
prevent operating and maintenance
problems.
WARNING: TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.
ATTENTION: Pour éviter les choc
électriques, introduire la lame la plus large de
la fiche dans la borne correspondante de la
prise et pousser jusqu'au fond.
For Customer Use
Enter below the Serial No., which is
located on the rear of the cabinet. Retain
this information for future reference.
Model No. __________________________
Serial No. __________________________
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 50FD995599 and is the answer not in the manual?

Questions and answers

Summary of Contents for Philips 50FD995599

  • Page 1 Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to. Once your PHILIPS purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS product. So complete and return the Warranty Registration Card enclosed with your purchase at once, and take advantage of these important benefits.
  • Page 2: Important Safety Instructions

    If you have any problems, Philips reprensatives can help you get the most from your new product by explaining: • Hookups • First Time Setup, and • Feature Operation. For fast help, call us first ! 1-800-531-0039 Thank you for making Philips a part of your home!
  • Page 3: Installation Location

    This plasma display mounting unit is for use only with PHILIPS 50 inch plasma displays. Do not use with any other equipment since the equipment could fall and cause injury.
  • Page 4 Unpacking and wall mounting instructions Special technology is required in the mounting of the plasma display. Such work should never be undertaken by the customer. For the safety of the customer, we ask that the installation work be started after careful attention is paid to the strength of the mounting location to be sure it will withstand the weight (about 101 Lbs) of the plasma display and mounting hardware.
  • Page 5 Assembling and mounting the wall mount unit & Securely fasten the upper and lower wall-side fittings to the Make sure that the wall mount unit is being fixed securely middle wall-side fitting with the four supplied M4 screws. enough so that it meets safety standards. é...
  • Page 6: Connect Peripheral Equipment

    Connect Peripheral Equipment You may connect 2 possible VGA sources ( Digital ( ) and RGB1 RGB3 3 possible video sources ( ) to the left side of the monitor. CVBS 1 Connect VCRs, DVDs or Laser Discs, etc. here. CVBS 2 CVBS 1 : cinch connector for Video CVBS or CVBS 2 : BNC connector for Video CVBS...
  • Page 7: Operation

    Connect your computer Note:When you connect a computer to this monitor, attach the supplied ferrite cores. If you do not do this, this monitor will not comply with the mandatory CE or C-Tick standards. & Set the (large) ferrite core on one end of the power cable (supplied). é...
  • Page 8: Picture Format

    Use of the remote control press repeatedly to select your computer connected to the or to the (digital RGB) connector. AV1, AV2, AV3 POWER to switch to standby or on again press to select the peripherals connected (Does not operate when POWER/ to one of the connectors (...
  • Page 9: Use Of The Menus And The Menu System

    Use of the menus and the menu system & Press the button on the remote control to display/cancel the MENU MAIN MENU. é Use the cursor button in the up/down directions to select the menus. MAIN MENU “ Press the cursor right to access the menu. PICTURE ‘...
  • Page 10: Screen Settings Menu

    Screen settings menu SCREEN In this menu you are allowed to adjust the position of the picture and to correct the flickering of the picture menu items. MODE NORMAL V-POSITION Note: H-POSITION - The menu items are not available with AUTO PICTURE, FINE PICTURE PICTURE ADJ.
  • Page 11 DVI ADJ LONG LIFE This control allows you to select the most appropriate setting when the (PLE AUTO) picture input from the DVI input extension is distorted. Select 1, 2 or 3. INVERSE Note: When you adjust the ., the position of the menu display will change. In DVI ADJ SCREEN WIPER such a case, be sure to adjust the position.
  • Page 12 Options 2 menu OPTIONS2 Setting the BNC connectors BNC SELECT This control allows you to select whether to set the input of the 5 RGB SELECT BNC connectors to RGB or Component. See Connect Peripheral HD SELECT Equipment, p. 6. PICTURE SIZE &...
  • Page 13: Frequency Menu

    Set-up menu SET -UP Setting the menu language LANGUAGE • ENGLISH • & Select LANGUAGE COLOR SYSTEM • é Use the cursor left/right to select one of the languages which will be used to display the menus. PRESS OK TO CONFIRM “...
  • Page 14 Table of Signals Supported Supported resolution *2,3,4 • When the screen mode is L, each signal is converted to a 1024 dots x 768 lines signal (except for NORMA • When the screen mode is , the picture is displayed in the original resolution. TRUE •...
  • Page 15 *1 Only when a graphic accelator board that is capable of displaying 852 x 480. *2 This signal is converted to a 1228 dots x 768 lines signal. *3 The picture is displayed in the original resolution. *4 The aspect ratio is 5:4.This signal is converted to a 960 dot x 768 line signal. *5 Normally the RGB select mode suite for the input signals is set automatically.
  • Page 16: Before Calling Service

    The plasma display might then also End of life directives produce a humming sound. After bringing Philips is paying a lot of attention to Do not hang up the monitor above a the set below 6526 ft (local air pressure produce environmentally-friendly in green central heating or other heating sources.
  • Page 17 RENEWED 90 DAY LIMITED WARRANTY...

Table of Contents