Philips QC5570/13 Manual page 31

QC5570EN_P20-35_A6_CS3 30
5 Rinse the cutting element under the tap or
clean it with the cleaning brush supplied.
6 Rinse the inside of the appliance under the tap
or clean it with the cleaning brush supplied.
7 Insert the lug of the cutting element into the
1
slot (1) and push the cutting element back
onto the swivel head (2).
2
Cleaning the shaving head
Note: Regulary check the shaving foil for cracks.
1 Switch off the appliance and disconnect it from
the mains.
2 Press the release buttons on the shaving
head (1) and remove the shaving foil from the
shaving head (2).
3 Rinse the shaving head and shaving foil under
the tap.
Note: To clean the shaving head with the cleaning
brush, brush the inside and outside of the shaving head
and the outside of the shaving foil. To remove cut hairs
30
English
12.12.14 3:54:38 PM