Frigidaire FRA065AT7 Installation Instructions page 4

Installation
NOTE: It is difficult to lock the windows with the sash lock for Vinyl-Clad windows, so you can use lock by
window itself.
Cut foam window seal and insert it into the space between the upper and lower sashes (FIG. 11).
FIG. 10
After the completion of the installation, please check the machine's lean as shown (FIG. 12A & FIG. 12B). It's
necessary for proper condensed water utilization and drainage.
FIG. 12A
H
INSIDE
H
about
Wooden Window
Trim the weather seal
peel off the protective backing and plug any gaps if needed
Removing the air conditioner From Window
Turn the air conditioner off, and disconnect power cord.
Remove sash seal from between windows, and unscrew sash lock.
Remove screws installed through frame and framelock.
Close (slide) side panels into frame.
Keeping a firm grip on air conditioner, raise sash and
carefully remove.
Be careful not to spill any condensate water while lifting
unit from window. Store parts WITH air conditioner.
4
OUTSIDE
Bottom Rail
with a proper length,
FIG. 12B
H
INSIDE
H=H1-H2
H1 H2
Vinyl-Clad Window
FIG. 11
FOAM SEAL
OUTSIDE
Bottom Rail