Table of Contents
Advertisement
[ TV System ]
If the video does not appear correctly,
change the setting. By default, this setting
matches the most common setting for TVs
in your country.
•
[ PAL ]
– for PAL-system TV.
•
[ Multi ]
– for TV that is compatible
with both PAL and NTSC.
•
[ NTSC ]
– for NTSC-system TV.
[ TV Display ]
Select the screen format according to how
you want the picture to appear on the TV.
4:3 Pan Scan (PS)
4:3 Letter Box (LB)
•
[ 4:3 Pan Scan ]
full-height screen display with the sides
trimmed.
•
[ 4:3 Letter Box ]
'wide-screen' display with black bars on
the top and bottom.
•
[ 16:9 ]
– for wide-screen TV (frame
ratio 16:9).
[ Progressive ]
If a progressive scan TV is not connected
through HDMI cable, turn on progressive
scan mode.
•
[ On ]
– turn on progressive scan
mode.
•
[ Off ]
– disable progressive scan mode.
Tip
•
There is more detailed description available. See
chapter 'Get Started - Turn on Progressive Scan' for
details.
30
EN
16:9 (Wide Screen)
– for standard TV, a
– for standard TV, a
[ Picture Setting ]
Select a predeÀ ned set of picture colour
settings or customise the personal setting.
•
[ Standard ]
– original colour setting.
•
[ Bright ]
– vibrant colour setting.
•
[ Soft ]
– warm colour setting.
•
[ Personal ]
– customise the colour
setting. Set the level of brightness,
contrast, sharpness and colour
saturation, then press OK.
[ Component Video ]
Select the video output that matches the
video connection between this DVD
player and the TV.
•
[ Interlaced ]
(Y Pb Pr) connection.
•
[ RGB ]
– for scart (TV OUT)
connection.
[ HD JPEG ]
Enjoy untouched and uncompressed JPEG
pictures at it's original resolution when you
connect this DVD video player and the TV
with a HDMI cable.
•
[ On ]
– display high deÀ nition picture.
•
[ Off ]
– display standard picture.
Note
•
This DVD video player supports the resolution
display of 720p and above.
– for component video
Advertisement
Table of Contents
