INSTALL...PRESS PLAY appears on
the display panel. Press
radio stations.
3
Use the remote control to listen or to
change radio stations.
Play buttons
Button
Action
/
Select a preset radio station.
or
Alphanumeric
buttons
Navigation
Left/Right: Search for a radio
buttons
station.
Up/Down: Fine tune a radio
frequency.
Press to stop the installation
of radio stations.
Press and hold to erase the
preset radio station.
SOURCE
Manual:
button to
1) In radio mode, press
access radio
2) When a radio frequency
3) Repeat step 1 and 2 to
Automatic:
In radio mode, press and
hold
seconds to reinstall all the
available radio station.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz.
1
Press SOURCE repeatedly to select radio
source.
2
Press .
3
Press and hold
50 kHz or 100 kHz.
to install
OPTIONS.
blinks, press OK to store
the radio station.
store other stations.
OPTIONS for three
to toggle between
MP3 player
Connect a MP3 player to play audio files.
What you need
•
An MP3 player.
•
A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on your home theater.
•
If you use 6.5mm stereo audio cable,
connect the MP3 player to your
home theater using a 3.5mm - 6.5mm
converter jack.
2
Press AUDIO SOURCE repeatedly until
(Audio In) appears on the display
panel.
3
Press the buttons on the MP3 player to
select and play audio files.
Karaoke
Play a Karaoke disc on your home theater and
sing along with the music.
What you need
•
A Karaoke microphone.
•
Karaoke discs.
Note
•
To prevent loud feedback or unexpected noise, turn
the microphone volume to the minimum before you
connect the microphone to your home theater.
•
Karaoke setup menu is accessible only when a Karaoke
disc is loaded.
Play karaoke music
1
While playing a karaoke disc, press
(Home).
» The home menu is displayed.
EN
15