Part 4. Accessories Installation - LG TD-V10247G Owner's Manual

Part 4 ACCESSORIES INSTALLATION
Stacking Kit Installation Instructions
To ensure safe and secure installation, please
observe the instructions below.
WARNING!
• The weight of the dryer and the height of
installation makes the stacking procedure
too risky for one person. This procedure
should be performed by 2 or more
experienced service personnel.
• Incorrect installation can cause serious
accidents.
1 Place washer firmly on a stable, even and
solid floor.
2
Peel protective paper off the tape from the
stacking kit side bracket.
3
Fit the stacking kit side bracket firmly to the
side of top plate by attaching the double-
sided tape to top plate as picture shows.
Note
Clean the surface before attaching the brackets
and double-sided tape.
1 6
4
5
Stacking kit
6
7
• Do not use stacking kit with a gas dryer in potentially
unstable conditions like a mobile home.
Secure stacking kit side bracket to the
washer with a screw on the back of bracket.
Repeat Steps 2, 3, 4 for the other side.
Place the dryer on top of the washer by fitting
legs as shown in the picture. Avoid finger
injuries - be careful not to pinch fingers
between the washer and dryer. Slide dryer
slowly backwards to the stopper of kit.
WARNING!
• Do not stack a washer on the top of the dryer.
• Incorrect installation can cause serious
accidents.
Insert the front rail. Push the front rail back
to the stoppers of side stacking kit.
Attach both sides of the front kit with screws.
Dryer
Washer