Samsung DVG54M8750 Series User Manual page 31

03 Dry Level
04 Temp.
05 Time
06 Eco Dry
07 Mixed Load Bell
DV8750M_DC68-03784A-06_EN.indd 31
Press Dry Level to select a dry level from the options available.
The corresponding indicator turns on.
• Larger or bulkier loads may require Very Dry or More Dry for
complete dryness.
• Less Dry is best suited for lightweight fabrics or for leaving
some moisture in the clothing at the end of the cycle.
• Damp Dry is designed to partially dry items. Use for items that
lay flat or hang to dry.
NOTE
This option is not available with: STEAM SANITIZE, ACTIVE WEAR,
TIME DRY, QUICK DRY, AIR FLUFF, REFRESH, and WRINKLE AWAY.
Press Temp. to change the temperature of the current cycle.
• High: For sturdy cottons or those labeled Tumble Dry.
• Medium: For permanent press, synthetics, lightweight cottons,
or items labeled Tumble Dry Medium.
• Med Low: For heat lower than Medium. Use to dry synthetic or
washable knit fabrics.
• Low: For heat sensitive items labeled Tumble Dry Low or
Tumble Dry Warm.
• Extra Low: Provides the lowest heated drying temperature
possible.
Press Time to select a drying time for the selected cycle. This is
available only with TIME DRY, QUICK DRY, AIR FLUFF, and WRINKLE
AWAY.
This function is available with NORMAL and TIME DRY.
With the Eco Dry activated, drying takes a longer time but the
power consumption is reduced.
The drying time can be extended by up to 3 times depending on
the temperature and load. The Eco Dry function is enabled by
default.
The Mixed Load Bell notifies you when the average dry level in
a load is damp dry (80 % dried). This lets you take items that you
don't want fully dried or that dry quickly out of the dryer early
while letting others continue to dry.
You can select this option in all Sensor Dry cycle except for AIR
FLUFF, ACTIVE WEAR, TIME DRY, QUICK DRY, REFRESH, WRINKLE
AWAY, and STEAM SANITIZE. Available dry levels are Normal Dry,
More Dry, and Very Dry.
English 31
2019-06-03 6:03:30