LG 55WV70MD-B Owner's Manual page 78

78
CONTROLLING THE MULTIPLE MONITORS
41. Tile H Position (Command: d e)
To set the Tile Horizontal position.
* Only available when Tile Mode On and Tile Natural
Mode Off.
* Only available after changing Tile H Size
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data 00~32: Left -50 ~ Right 50
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
42. Tile V Position (Command: d f)
To set the Tile Vertical position.
* Only available when Tile Mode On and Tile Natural
Mode Off.
* Only available after changing Tile V Size
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data 00~32: Bottom 0~Top 50
* Data range varies depending on the current Tile V
value.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
43. Tile H Size (Command: d g)
To set the Tile Horizontal Size.
*Set Tile H Position to 0x32 (50) before setting Tile H
Size.
* Only available when Tile Mode On and Tile Natural
Mode Off.
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
Data 00~32: Min 0 ~ Max 50
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
44. Tile V Size (Command: d h)
To set the Tile Vertical size.
*Set Tile V Position to 0x00 before setting Tile V
Size.
* Only available when Tile Mode On and Tile Natural
Mode Off.
Transmission
[d][h][ ][Set ID][ ][Data][Cr]
Data 00~32: Min 0 ~ Max 50
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
45. Natural Mode (In Tile Mode) (Command : d j)
To assign the Tile Natural mode for Tiling function.
* Only available when Tile mode On.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
46. FAN Control (Command : d o)
To set Fan control on/off.
Transmission
[d][o][ ][Set ID][ ][Data][Cr]
Data 00: Auto
01: On
02: Manual
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]